ST Robotics Vacuum Suction Cup Robot Gripper

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

ST Robotics V17 Vacuum Pickup

The V17 vacuum gripper for the R17 robot arm comprises of suction cups on a mounting plate with the pneumatic fittings behind it.
The vacuum gripper has 3 suction ports which are routed within the robot to the pneumatic circuit which is connected to the controller. There are 4 tapped holes to allow for custom components to be utilised.
The pneumatic circuit includes a feedback sensor which knows when the vacuum pickup has connected to an object.

Features and Benefits

• Air consumption: 46 L/min (ANR)
• Maximum vacuum pressure: -88 kPa (12.76 psi)
• Maximum suction flow rate: 24 L/min (ANR)
• 3 suction cups supplied

Product Application Information

The vacuum pickup gripper is ideal for items that have a flat surface. Although they are less precise than finger grippers, they can lift an item from the top instead of the side.

ST Robotics

Warning

  • "Robot Range: Check delivery on order. *Non-returnable. Conditions apply.

    This item is from our Robot Range
    • At RS we like to offer our customers the widest choice of products possible. These products are specially manufactured by the supplier, on our behalf.
    • Check latest delivery when ordering.
    • Please ensure you have selected the correct product as once your order has been placed it cannot be cancelled or returned
    • Not available for premium delivery"
Specificaties
Kenmerk Waarde
Gripper Type Vacuum
End Effector Suction Cup
Number of Fingers 4
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 22/06/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.441,72
(excl. BTW)
1.744,48
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.441,72 €
Related Products
The E1 gripper for the R12 robot arm ...
Description:
The E1 gripper for the R12 robot arm is an electric gripper which uses a DC motor and leadscrew to drive the gripper fingers. The gripper includes stylised fingers with high friction rubber tips enabling it to manipulate items that ...
The EG17 for the R17 robot is a ...
Description:
The EG17 for the R17 robot is a high precision DC powered linear parallel gripper with a large reach and tapped holes enabling customisation.The parallel gripper works by sliding the two jaws together in the form of a parallel gripping ...
The TC12 tool Changer has been exclusively designed ...
Description:
The TC12 tool Changer has been exclusively designed for the ST Robotics R12 robot and does not require an external power source to operate. It comprises of two parts, the robot side and the tool side. • Spring loaded design• ...
Niryo One is a 6-axis open source collaborative ...
Description:
Niryo One is a 6-axis open source collaborative robot manufactured in France. Affordable and easy to use, it has been designed for higher education, vocational training and R&D laboratories. This industrial type robotic arm is based on ROS, Arduino and ...