RF SPDT Switch 6GHz 30dB ESD TSNP6

  • RS-stocknr. 171-1926P
  • Fabrikantnummer BGS12SN6E6327XTSA1
  • Fabrikant Infineon
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The BGS12SN6 RF MOS switch is specifically designed for WLAN and Bluetooth applications. Any of the 2 ports can be used as termination of the diversity antenna handling up to 30 dBm. This single supply chip integrates on-chip CMOS logic driven by a simple, single-pin CMOS or TTL compatible control input signal. The 0.1 dB compression point exceeds the switch’s maximum input power level, resulting in linear performance at all signal levels. The RF switch has a very low insertion loss of 0.25 dB in the 1 GHz and 0.29 dB in the 2.5 GHz range. Unlike GaAs technology, external DC blocking capacitors at the RF ports are only required if DC voltage is applied externally.

Up to 6GHz frequency range
Very low insertion loss <0.2dB
Small package size down to 0.65x0.98mm
Standard Bulk CMOS Technology in high volume factories

84100 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (Supplied on a Reel) Quantities below 150 on continuous strip
0,111
(excl. BTW)
0,134
(incl. BTW)
Aantal stuks
Per stuk
500 - 900
0,111 €
1000 - 2400
0,097 €
2500 +
0,092 €
Verpakkingsopties
Related Products
NXP's range of analogue switches and mulitplexers are ...
Description:
NXP's range of analogue switches and mulitplexers are suitable for a wide variety of purposes.
A wide range of radio frequency switch circuits ...
Description:
A wide range of radio frequency switch circuits from Analog Devices. The range features low loss broadband, positive control transfer switches and broadband non-reflective GaAs MESFET multiway switches.
The BGS12SN6 RF MOS switch is specifically designed ...
Description:
The BGS12SN6 RF MOS switch is specifically designed for WLAN and Bluetooth applications. Any of the 2 ports can be used as termination of the diversity antenna handling up to 30 dBm. This single supply chip integrates on-chip CMOS logic ...
The BGS13S4N9 RF MOS switch is specifically designed ...
Description:
The BGS13S4N9 RF MOS switch is specifically designed for cell phone and mobile applications. Any of the 3 ports can be used as termination of the diversity antenna handling up to 30 dBm. It offers outstanding ESD robustness of 1kV.This ...