3M Versaflo Charger for use with 3M Jupiter Powered Air Respirator

  • RS-stocknr. 124-0912
  • Fabrikantnummer 52-0000-5343-0
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

3M Intelligent Battery Charger Single Station

3M Jupiter single station intelligent battery charger is for use with the Jupiter powered air turbo. Simple an easy to use, plug into a power supply and the charger gives you a quick charge or a full charge as required. Orange and green LED visually show you the status of the charge and the charger shuts off when the charge is complete.

FEATURES and BENEFITS:

Single station charger
Mains powered
Portable
Easy and simple to use
Quick charge option
Full charge option
Orange and green LED status
Automatic shut off when charge is complete
Charging temperature range 0°C to +40°C
For use with the Jupiter Powered Air Turbo Respirator
CE Approved

BATTERY CHARGER STATUS:

Orange LED = On, Green = Off = Status Quick Charge
Orange LED = Off, Green LED = On = Status Fully charged
Orange and Green LED on a slow flash = Fault

Approvals

CE Approved

Powered & Air-Fed Respirators

Specificaties
Kenmerk Waarde
Type Charger
For Use With 3M Jupiter Powered Air Respirator
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
13 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
143,79
(excl. BTW)
173,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
143,79 €
Related Products
Cut-out power supply charger for Li-Ion batteries.3 charge ...
Description:
Cut-out power supply charger for Li-Ion batteries.3 charge control stages. Automatic detection of completed charge. Protected against current overloads and polarity reversal.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproved for medical devices: EN 60601. ...
Cut-out power supply charger for 12 V and ...
Description:
Cut-out power supply charger for 12 V and 24 V lead acid batteries.3 charge control stages.Wide input voltage range.Protected against reverse polarity and short circuits.Includes EU, UK, US & AUS input plugs plus 2.1mm & 2.5mm output plugsApproval: EN 60601-1-2 ...
The CTEK MXS 10 series lead-acid battery charger ...
Description:
The CTEK MXS 10 series lead-acid battery charger is ideal for professional use and excellent in workshops, caravans, motorhomes, boats or cars. It offers features such as battery diagnosis that shows if a battery can receive and retain a charge. ...
The Ansmann battery charger is designed for 6V, ...
Description:
The Ansmann battery charger is designed for 6V, 12V and 24V lead-acid batteries with a charge current of 500mA, 1A and 2A. This has EURO and UK plug type. This can be left connected to the battery without interruption and ...