2P 10 kA, 20 kA 10 A RCBO, DIN Rail Mount, Trip Sensitivity 30mA Sentron 5SU1

  • RS-stocknr. 150-4176
  • Fabrikantnummer 5SU1354-6KK10
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: RO
Productomschrijving

RCBOs are a combination of an RCCB and a miniature circuit breaker in a compact design for personnel, fire and line protection. For personnel protection and fire protection, the residual current part of the type AC trips in the event of sinusoidal AC residual currents, type A also trips in the event of pulsating DC residual currents. In addition, RCBOs type F also detect residual currents with mixed frequencies up to 1 kHz. RCBOs with a rated residual current of maximum 30 mA are used for personnel, material and fire protection, as well as for protection against direct contact.

Clear and visible conductor connection in front of the rear bus bar facilitates controls
Large and easily accessible wiring space enables easy insertion of conductor in the terminals
The surge current withstand capability of over 1 kA ensures safe and reliable operation
All additional components for miniature circuit breakers can be retrofitted on the right-hand side

Specificaties
Kenmerk Waarde
Range Sentron
Series 5SU1
Current Rating 10 A
Trip Sensitivity 30mA
Number of Poles 2
Mounting Style DIN Rail
Circuit Breaker Type RCBO
Overall Length 35.4mm
Overall Depth 76.2mm
Overall Dimensions 35.4 x 90 x 76.2mm
Break Time Instantaneous
Reset Actuator Type Toggle Switch
Overall Width 90mm
Standards Met CCC, CE, DIN EN 61346-2, DIN EN 81346-2, EN 60898, IEC 60947-2, VDE
Rated AC Voltage 230 V
Terminal Contact Type Screw
Breaking Capacity 10 kA, 20 kA
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Each
139,50
(excl. BTW)
168,80
(incl. BTW)
Aantal stuks
Per stuk
1 +
139,50 €
Related Products
Compact design with precise nominal current levelsModular expansion ...
Description:
Compact design with precise nominal current levelsModular expansion possible thanks to the uniform, plug-in housing conceptActive current limitation, even when switching capacitive loadsN/O contact for remote signaling of the operating state.
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
Voltage surges, often referred to as spikes or ...
Description:
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current ...
The SEC (Safe Energy Control) range from Phoenix ...
Description:
The SEC (Safe Energy Control) range from Phoenix Contact are type 1/2, DIN rail lightning current arresters. These arresters are designed to assist with protecting your circuits by capturing any high voltages from lightning. The FLT-SEC range is in accordance ...