JG Speedfit Polyethylene Pipe, 2m long x 22mm OD

Cross-linked to polythene pipe tested to DIN 16892
Supplied in either 2 metre lengths in bundles of five or in 25 metre coils

Pipe inserts are recommended for installations using plastic pipe (see this section)

DO NOT USE FOR: Gas, fuel oil or compressed air applications

BS EN ISO 9001: BS 7291 Parts 1 & 3 Class S

Approved to WRC, BBA, PKM, PEM

WRC; BBA; PKM; PEM

BS EN ISO 9001; BS 7291 Parts 1 & 3 Class S

SpeedFit Tube, Conduits & Tube Inserts

Pipe Suitability - Speedfit fittings can be used with: Copper pipe to BS2871 Part 1 / BSEN 1057: 1996, Speedfit cross linked polyethylene (PEX) Barrier Pipe to BS7291. Speedfit fittings cannot be used on stainless steel pipe.,Applications - Mains fed and indirect cold water systems, vented and unvented hot water systems and vented and sealed central heating systems.,Material - Polysulfone, Acetal