Greenlee Punch and Die Tool, 20.4mm, Circular, Hand Operation

  • RS-stocknr. 388-6324
  • Fabrikantnummer 50319914
  • Fabrikant Greenlee
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: US
Productomschrijving

ISO Hand Punches

Slug buster are round and special shape punches with a unique profile for slug splitting, allowing easy slug removal. Slug buster punches are usually suitable for mild steel, plastic and aluminium up to 3.5mm thick. Their application is also for manual and hydraulic operation.

Features and Benefits

• All punches are ISO standard sizes
• Use with manual, ratchet or hydraulic punch drivers
• Will punch mild steel, aluminium, fibreglass and plastic up to 3 mm

Specificaties
Kenmerk Waarde
Cutting Capacity Mild Steel: 3 mm; Aluminium: 3 mm; Fibreglass and Plastic; 3 mm
Hole Shape Circular
Hole Size 20.4mm
Operation Hand
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
39,81
(excl. BTW)
48,17
(incl. BTW)
Aantal stuks
Per stuk
1 +
39,81 €
Related Products
For punching holes in thin sheet steel, aluminium ...
Description:
For punching holes in thin sheet steel, aluminium and brass up to 14 gauge (1.5mm)Tool develops up to 1 ton force7 punches from 3/32 " to 9/32 " in 1/32 stepsSupplied with die key & storage caseThroat depth of 1 ...
Use to punch burr-free holes for switches and ...
Description:
Use to punch burr-free holes for switches and instruments in enclosures. Die alignment marks for accurate alignmentPunch up to 3.0mm mild steel and up to 1.5mm stainless steel (punching stainless steel reduces lifetime of punches)Supplied complete with punch, die, draw ...
High quality punches for fast accurate panel punching. ...
Description:
High quality punches for fast accurate panel punching. Capacity up to 2.0mm mild steel depending on sizeBall bearing draw stud to minimise working force requiredFor hydraulic operation with punch driver stock no.363-0632 or stock no. 398-6187 an adaptor is required ...
High quality punches for D connector cut-outs. Fast ...
Description:
High quality punches for D connector cut-outs. Fast accurate panel punchingCapacity up to 1.6mm mild steelBall bearing draw stud to minimise working force requiredFor hydraulic operation with punch driver stock no. 363-0632 use adaptor stock no. 478-0615.