TE Connectivity AMPLIMITE Series Plastic D-sub Connector Backshell, 9 Way

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AMPLIMITE D-Sub Connector, Series HDE, HDP RFI/EMI Straight Exit Shielded Backshells

AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits accept a variety of shell sizes and cable diameters, please see table for details.
Part numbers 5745171-x, 5745172-x, 5747173-x, 5745174-x and 5745175-x have zinc alloy shields plated with bright nickel over bright copper.
Part numbers 5745854-x, 5747099-x, 5745833-x, 5747100-x and 5748677-x have thermoplastic shields plated with nickel over copper.
Each kit also contains zinc plated stainless steel 4-4- fillister head screws, hex nuts and 4-40 mounting screws. Stock number 680-9355 is also supplied with 4 grommets.
For ferrules see stock numbers 718-0730, 745-5791 and 680-9383 typically
For two piece spring latch see stock number 450-9321

Note

Jackscrews must be purchased separately
Shielded backshells will not accept connector housings with clinch nuts

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Number of Contacts 9
Housing Material Plastic
D-Sub Shell Size E
Colour Silver
Series Amplimite
29 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,83
(excl. BTW)
9,47
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
7,83 €
25 - 74
6,85 €
75 - 199
6,52 €
200 - 399
6,20 €
400 +
5,56 €
Verpakkingsopties
Related Products
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
Nickel plated die-cast zinc ADK backshells come as ...
Description:
Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.These backshells have self tapping T10 screws, a suitable driver would be 736-181.
These shielded D-Sub Hoods from FCT are nickel ...
Description:
These shielded D-Sub Hoods from FCT are nickel plated plastic for shell sizes 1 to 4. With 50° angled cable entry these shielded D-Sub Hoods present a low profile. The Locking Screws are nickel plated brass with a 4-40UNC thread ...
A range of top and side entry spring ...
Description:
A range of top and side entry spring or slide locking d-sub connector hoods or backshells made from thermoplastic or metallized thermoplastic.Part numbers 0967xxx0511 are grey thermoplastic backshells with a side cable entryPart numbers 0967xxx0411 are grey thermoplastic backshells with ...