TE Connectivity, AMPLIMITE Blank Slide Lock

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

//media.rs-online.com/t_line/L270988-01.gif
//media.rs-online.com/t_line/L450920-01.gif
//media.rs-online.com/t_line/L450936-01.gif

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
For Use With Slide Lock
Series AMPLIMITE
77 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
695 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
2,97
(excl. BTW)
3,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
2,97 €
25 - 74
2,50 €
75 - 199
2,38 €
200 - 399
2,26 €
400 +
2,09 €
Related Products
The Heavy Duty Sealed Connector Series, so called ...
Description:
The Heavy Duty Sealed Connector Series, so called HDSCS, is targeted for the commercial vehicle industry and off-road applications. The HDSCS program consists of five groups of connectors in different sizes, starting from 2 up to 18 way connectors. In ...
IP67 SEAL-D connector caps which meet IEC-529-IP67 requirements. ...
Description:
IP67 SEAL-D connector caps which meet IEC-529-IP67 requirements. These SEAL-D IP67 connector caps are suitable for use with the NorComp SEAL-D D-Sub connectors and existing industry standard IP67 connectors. These IP67 covers consist of an ABS backshell, silicone bushing and ...
A range of large crimp flanges for use ...
Description:
A range of large crimp flanges for use with TE Connectivity standard rail and Quick Lock all metal shielded back shells. For compatible hoods see typical part numbers 139-0759, 139-1679 and 139-0769. Crimp flanges, when used with appropriately sized crimp ...
Professional range of Phoenix Contact D-Sub connectors and ...
Description:
Professional range of Phoenix Contact D-Sub connectors and accessories from the VS series. Various accessories include mouting frames, cap nuts and protective covers. Crimp or Solder pinsVarious positions available.