Arduino MKR Therm Shield

  • RS-stocknr. 189-4520
  • Fabrikantnummer ASX00012
  • Fabrikant Arduino
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

Arduino MKR Therm Shield

The MKR THERM Shield allows a MKR board to acquire temperatures from a thermocouple of type K and a DS18Bxxdigital one wire sensor Thermocouples are based on the thermoelectric properties of a junction between two different metals and are capable of measuring with good precision ranges from -270 to +1372 Celsius (K type) that are far beyond any digital sensors or NTC/PTC (thermistor) range.
A typical application of thermocouples is in boilers, soldering stations and coolers. Also good quality 3D printers rely on thermocouples to measure the extruder temperature. The K thermocouple has usually two wires, made of Alumel and Chromel that need to be connected with special care: no solder, just mechanical connection, therefore we support on the shield both the standard K type connector and a screw terminal.

Features

• The analogue nature requires specific interfacing and this shield relies on the MAX31855 thermocouple digital interface
• Max. operating temperature range: -200°C to +700°C
• Operating voltage: 3.3V

The MKR THERM Shield allows a board of the MKR family to acquire temperatures from a thermocouple of type K and a DS18Bxx digital one wire sensor. The Thermocouple is a kind of temperature sensor that offers high accuracy and a wide range of measured temperatures. Its analogue nature requires specific interfacing and this shield relies on the MAX31855 thermocouple digital interface. The two connectors of the MKR THERM Shield allow the usage of Type K thermocouples with or without a plug attached to the metal wires. The MKR THERM Shield has its own library to read the temperature measured by the thermocouple.

Specificaties
Kenmerk Waarde
Kit Name Arduino MKR Therm Shield
Technology Shield
26 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
39,93
(excl. BTW)
48,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
39,93 €
5 - 9
39,13 €
10 +
38,35 €
Related Products
An Optical Pulse Sensor Evaluation board from ROHM ...
Description:
An Optical Pulse Sensor Evaluation board from ROHM intended for use with the Arduino Sensor Shield Evaluation Kit, RS 125-0453. The modular board includes the BH1790GLC optical sensor IC and suitable green LEDs allowing human pulse detection via finger contact. ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards.The 8x8 B Click features an 8 x 8 blue LED matrix with a serial interface. MAX7219 common-cathode display driver with serial I/O interfaceAnalogue and digital brightness ...
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development ...
Description:
The CY15FRAMKIT-001 is an F-RAM (Ferroelectric RAM) development kit for high-performance, high-reliability and energy efficient serial F-RAM devices.The CY15FRAMKIT-001 kit has been designed to operate with the Arduino UNO R3 board with stackable connectors. Compatible with CY8CKIT-042, CY8CKIT-042-BLE and ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in MikroElektronika microcontroller development boards. DC MOTOR click provides full H-Bridge control for a small DC motor. DRV8833RTY H-Bridge motor driver chipSpeed controlled by PWM signalTwo signals provide direction and brake/coast ...