Cynergy3 Process Pump Controller, 240 V ac, IP65

  • RS-stocknr. 348-7949
  • Fabrikantnummer FCHM
  • Fabrikant Cynergy3
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

’HYDROMATIC’ Pressure Regulator

Features a differential pressure switch, dry running cut-out, control panel, pressure reservoir and non-return valve
Start up pressure 0.5 to 3.5 bar minimum, adjustable
Differential pressure switch controls water pressure in pumped systems and ensures constant flow
Helps to prevent boiler cycling and protects against water hammer
Visual indication and manual reset for water circuit faults
Ingress protection to IP55
Maintenance-free
Auxiliary fuse to protect pump control circuit

Specificaties
Kenmerk Waarde
Supply Voltage 240 V ac
Connection 1 in G
IP Rating IP65
Maximum Flow Rate 100L/min
Maximum Fluid Temperature +60°C
Maximum Output Pressure 10bar
22 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
146,86
(excl. BTW)
177,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
146,86 €
5 - 9
142,33 €
10 +
137,67 €
Related Products
The Xylem Jabsco electric central heating DC pump ...
Description:
The Xylem Jabsco electric central heating DC pump is the latest innovation used wherever a highly efficient circulation pump is needed without a direct connection to AC power. This magnetically coupled impeller pump is characterised by its small size, high-efficiency, ...
Adjustment of the metering rate directly in l/h ...
Description:
Adjustment of the metering rate directly in l/h or gphSimple tube changeNo problems with very gaseous media or air locksSuitable for viscosities of up to 10,000 mPasSole contact with media in the tubeMany different control options, such as using an ...
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devicesEven distribution of dutyParallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcectsSupply voltage ...
Fits to pump body or pipe work (pipe ...
Description:
Fits to pump body or pipe work (pipe diameter 20 to 200mm)A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause ...