Xylem Process Pump Controller, 230 V ac, IP55

  • RS-stocknr. 144-9305
  • Fabrikantnummer 10073L2AA
  • Fabrikant Xylem
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

Hydrovar Pump Controller

Hydrovar is an intelligent controller that matches pump performance to demand. The pump controller controls the speed of a standard IEC motor by converting the fixed voltage and frequency from the power supply line. The Hydrovar controller can be easily fitted to any pump system using the fast and easy ""clip and play"" mounting clamps.

Features and Benefits

Energy savings of up to 70% Automatic test starts
Auto cyclic change of lead and lag pump units
A memory for any inverter fault signals
Operating hours run counter
Two levels of password protection if required
Stopping the pump if there is water failure
Protection against dry running

Product Application Information

Fire fighting Food and beverage
Geothermal
Irrigation / Agricultural
Domestic / Industrial water supply
Municipal water supply
HVAC
Water displays / Fountains / Features
Mining / Drainage / Dewatering

Hydrovar is the intelligent pump controller that matches the performance to the demand. The system consists of a variable speed drive, a control card, sensors, EMC filters and motor/system protection. There’s no need for an external control panel when using Hydrovar. The Hydrovar is easily mounted directly on the motor of the pump and will fit on any standard IEC motor.

HYDROVAR can be fitted on any standard IEC motor up to 22 kW. Wall mounting kits are available on request (see accessories section)
No separate microprocessor is needed
No separate control panels are needed
No large pressure vessels are needed
No anti-con heaters are needed as these are built in as standard
Error logs and real time and date calendar.

Xylem

Specificaties
Kenmerk Waarde
Supply Voltage 230 V ac
IP Rating IP55
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
These variable phase angle regulators are robust, compact ...
Description:
These variable phase angle regulators are robust, compact and enclosed units for 230V or 110V up to 15A single phase mains driven inductive loads, such as induction motors, fans & pumps. They give fully adjustable voltage outputs from zero to ...
Liquid Level Relays are used to monitor the ...
Description:
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use. Dual voltage sensing relay 115/230V ACSingle or ...
Fully Automatic operation enabling both draining and filling ...
Description:
Fully Automatic operation enabling both draining and filling at the same time with a single device Protects submersible pumps against dry running and prevents overfilling Enables maximum utilization of incoming liquid supply Specially designed corrosion and shock resistant sensors to ...
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devicesEven distribution of dutyParallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcectsSupply voltage ...