Georg Fischer Electro fusion Fitting 110mm Straight Coupler

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CH
Productomschrijving

ELGEF+ Coupler

This Georg Fischer coupler is ideally used for industrial pressure applications such as water and gas. The coupler provides an extensive combination of possibilities and with an ease of assembly. 4 mm pin connectors ensure a secure fit between all ends of the pipe.

Features and Benefits

Integral pipe fixation
Max pressure – 10 bar Gas / 16 bar Water
Limited path fusion indicators
Removable centre stop

George Fischer Electrofusion Fittings

Georg Fischer ELGEF+ is the electrofusion system for pressurised piping systems. Each part has been developed to work with all other system components. Whether for water, gas or other pressurised piping, above or below ground. Enables a quick and reliable connection of your pipes and spigot through electrofusion.

Specificaties
Kenmerk Waarde
Fitting Direction Straight
Fitting Type Coupler
Series ELGEF Plus
Maximum Working Pressure 10 (Gas) bar, 16 (Water) bar
Length 145mm
Connection Size 110mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,16
(excl. BTW)
25,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
21,16 €
Related Products
CEJN's non drip couplings are designed for low-pressure ...
Description:
CEJN's non drip couplings are designed for low-pressure fluid and vacuum applications, and their performance and safety requirements. The product range is ideal for connecting all types of fluid lines. All have a single disconnect stage. Nickel-plated brass body, NBR ...
The SKF connection nipple designed for use as ...
Description:
The SKF connection nipple designed for use as adapters to enable pipes and hoses to be connected to different thread sizes. 400MPa pressure.
In-line flow adaptors incorporating paddle wheel transducer which ...
Description:
In-line flow adaptors incorporating paddle wheel transducer which is set in rotation when liquid flows through the pipe. Bayonet sensor connection enables sensor to be removed without disturbing the pipe workInterfaced to pipework via solvent cement couplingMeasuring range; from 0.3m/s ...
PVC- U tee installation fittings with a BSP ...
Description:
PVC- U tee installation fittings with a BSP thread and FPM O-ring seal. Ideal for installing measurement and flow sensing equipment into PVC-U pipelines and for use in water treatment and chemical process industries.