Sick Pressure Switch, G 1/4 Female, M12 5-Pin 0bar to 10 bar

  • RS-stocknr. 100-0681
  • Fabrikantnummer PAC50-DGC
  • Fabrikant Sick
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

PAC50 Pressure Switches

The SICK PAC50 pressure switch provides an easy to read overview of important system information using a clear bi colour display. Simple to programme making commissioning fast and easy, the PAC50 provides up to 2 switch outputs and an extra analogue output in a rugged casing.

Switched outputs can be programmed to be NPN, PNP or push-pull. Analogue inputs automatically detect whether a voltage or current signal is required simplifying installation and reducing stocking cost.

Features and Benefits

Integrated pressure switch, transmitter and display
Clear simultaneous display of applied pressure and set points
Colour change when set points are reached
3 large push buttons
DIN rail or panel mounting (via accessory)
Standard M12 electrical connection
PIF connection or 2 x G1/4” female (1 on rear, 1 on bottom)
Switch outputs configurable PNP, NPN, Push-pull. IO Link V1.1.
Analogue outputs configurable 4-20mA / 0-10V
Pressure ranges available -1 to 0 Bar, -1 to +1 Bar, 0 to 6 Bar, 0-10 Bar

Set-up and Installation

Installation and set-up of the PAC50 is fast and easy with no tools required for programming. Mounting is done using the integrated DIN Rail Mounting on the back or with the panel and wall mounting kit available separately (1000682).

Set-up and commissioning are done by using the three buttons on the front panel. Use the arrow keys to navigate the menu and the middle key to select the required parameter. Then simply use the arrow keys and adjust to the required set point before saving by using the middle key. Your PAC50 is now ready for operation.

Applications

The PAC50 is suitable for use with both positive pressure and vacuum systems in a range of applications including pneumatic control systems, vacuum grippers and cylinder pressure regulation.

Specificaties
Kenmerk Waarde
Minimum Operating Pressure 0bar
Maximum Operating Pressure 10 bar
Pressure Type Positive Pressure
Suitable Media Air
Connection G 1/4 Female, M12 5-Pin
Voltage Rating 17 → 30V dc
Connection Thread Size M12, 1/4 in
Manufacturer Series PAC50
Contact Operation Normally Closed, Normally Open
Connection Thread Standard G, Metric
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
IP Rating IP65, IP67
LED Indicator Yes
Output Range 0 → 10 V, 4 → 20 mA
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
134,00
(excl. BTW)
162,14
(incl. BTW)
Aantal stuks
Per stuk
1 +
134,00 €
Related Products
Pressure transducer for relative pressureFor liquid and gaseous ...
Description:
Pressure transducer for relative pressureFor liquid and gaseous mediaWorks according to the thick-film DMS measuring principleCurrent output.
The Bosch Rexroth HED8 series hydro-electric pressure switch ...
Description:
The Bosch Rexroth HED8 series hydro-electric pressure switch has a maximum operating pressure of 500bar. This switch is an individual connection with the connector. It is designed to switch an electric circuit when the desired pressure is reached. It can ...
Pressure switches that allow microswitch operation once a ...
Description:
Pressure switches that allow microswitch operation once a pre-set pressure is reached. K and K3 Series incorporate a mechanical stop providing over-pressure protection for the spring and microswitch. Electrical connections for all models to DIN 43650. A range of switches ...
The 18D series pneumatic pressure switches from RS ...
Description:
The 18D series pneumatic pressure switches from RS Pro are intrinsically safe to operate and contain a microswitch with gold plated contacts.These pressure switches are ATEX approved. • Microswitch with gold plated contacts • High number of switching cycles • ...