Gems Sensors ATEX Gauge for Sea Water Pressure Sensor, 70mbar Max Pressure Reading , 9 → 35 V dc, G1/4, IP65

  • RS-stocknr. 455-4589
  • Fabrikantnummer 5000BGM7000GG000A001
  • Fabrikant Gems Sensors
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Low Pressure Industrial Transmitters Series 5000

Gems Sensors 5000 series low range pressure transducers feature a ceramic diaphragm and precision capacitance technology to detect minute pressure variations, while withstanding large pressure spikes. The tough ceramic sensor is housed in a stainless steel case to ensure performance in the most demanding applications. A switch and potentiometer can be accessed for field adjustment of range with 3:1 ranging capability.

Features and Benefits

4 mA to 20 mA or 0 V dc to 5 V dc output options available Designed for use in hazardous or safe areas
Ceramic sensor with nitrile 'O' ring seal
Duplex stainless steel body
IP65 rated
0.2% accuracy
-40 to +100°C range
5 ms response time

Specificaties
Kenmerk Waarde
Pressure Reading Type Relative
Minimum Pressure Reading 25mbar
Maximum Pressure Reading 70mbar
Accuracy 0.2 %
Output Type Analogue
Media Measured Sea Water
Process Connection G1/4
Analogue Output 4 → 20 mA
Electrical Connection DIN 43650 Type A
Response Time 5 ms
Supply Voltage 9 → 35 V dc
Housing Material Stainless Steel
IP Rating IP65
Maximum Operating Temperature +85°C
Minimum Operating Temperature -25°C
Hazardous Area Certification ATEX
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
589,80
(excl. BTW)
713,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
589,80 €
Related Products
Wika S-20 series pressure transmitters for general industrial ...
Description:
Wika S-20 series pressure transmitters for general industrial applications, the ideal solution for demanding measuring requirements. It features high accuracy, a robust design and an exceptional number of variants, meaning it can be suited to the widest range of applications. ...
The IPSU-M12 series is suitable for use in ...
Description:
The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting ...
Water head pressure equals 100mbar/metre which can be ...
Description:
Water head pressure equals 100mbar/metre which can be measured using submersible pressure transmitters in atmospheric tanksStainless steel wetted partsZero/span tolerance; 0.1%Maximum overpressure: 2 x FSElectrical connection via moulded cable suitable for immersionDimensions: body diameter;27.3mm, body length; 100mm.
Measures the level in atmospheric tanks by measuring ...
Description:
Measures the level in atmospheric tanks by measuring the head pressureCan be used to measure the level of water, diesel, fuel oil and general Industrial liquidsFitting can be either from the top of the vessel or externally at the baseCeramic ...