Reliance 16bar Anti-Vacuum Valve with Male BSP 1/2 in BSP Male Connection

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: AU
Productomschrijving

Automatic Anti-Vacuum Valve

Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with multiple outlets below the base of the hot water heater. The valve contains a check cartridge which under normal conditions is held closed by the system pressure. When a vacuum condition exists, the suction will cause the check cartridge to open and air to flow through, equalising the pressure within the hot water heater

Automatic protection against a vacuum forming in hot water installation
Solid brass body for long life
Easy access to the internals from the top of the valve
Quick and simple service

Approvals

WRAS

Specificaties
Kenmerk Waarde
Connection 1/2 in BSP Male
Maximum Set Pressure 16bar
Maximum Temperature +99°C
For Use With Hot Water
Body Material Brass
Connection Gender Male
Thread Size 1/2in
Thread Standard or Connection Type BSP
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
29,85
(excl. BTW)
36,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
29,85 €
Related Products
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approvedRubber diaphragmDischarge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noiseThumbscrew on lever provides vertical and horizontal adjustment ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approvedSmall and quiet in operationMinimum working pressure 0.15 barFits most tanks and cisternsManufactured from 4-ton tensile strength engineering resin to high tolerancesAvailable for side and bottom ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
RS Screwed End Globe Valves used for regulating ...
Description:
RS Screwed End Globe Valves used for regulating flow in a pipeline and available in a variety of sizes. 1/4"-2" (DN8-DN50)W.P: 200WOGW.T: -20°C-200°C (-4°F-392°F)Investment castingThread type: ASME B1.20.1 (NPT), DIN 2999 & BS21, ISO7/1 & EN10226.