RS PRO Pressure Reducing Valve, 1/2 in Screwed Iron Female

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: IT
Productomschrijving

Pressure Reducing Valve - BSP Female

To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second
Suitable for use with water or compressed air
Can be installed in any position and serviced in situ
Single piece acetal resin cartridge
Preset pressure
40°C maximum operating temperature

Note

To facilitate maintenance it is recommended that isolation valves are fitted before and after the pressure reducing valve.
No Gauge port

//media.rs-online.com/t_line/L761345-01.gif
//media.rs-online.com/t_line/L761351-01.gif
//media.rs-online.com/t_line/LI761351-01.gif
Specificaties
Kenmerk Waarde
Connection 1/2 in Screwed Iron Female
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Chrome Plated Brass
Maximum Flow Rate 2L/s
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type Screwed Iron
Outlet Pressure Range 1 6bar
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
35 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 63,10 €
53,64
(excl. BTW)
64,90
(incl. BTW)
Aantal stuks
Per stuk
1 +
53,64 €
Related Products
A compact stainless steel non return disc check ...
Description:
A compact stainless steel non return disc check valve designed for use with steam and hot condensate. These valves have a CE marking of PN25. Connections are female screwedLow pressure dropSimple and compact designHorizontal or vertical installation.
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approvedSmall and quiet in operationMinimum working pressure 0.15 barFits most tanks and cisternsManufactured from 4-ton tensile strength engineering resin to high tolerancesAvailable for side and bottom ...
High quality lubricated packingNon rising stemCan be re-packed ...
Description:
High quality lubricated packingNon rising stemCan be re-packed under pressureSolid brass wedgeBSI Kitemark approved: License no. KM-06045.Gravity Die Cast Brass body stock nos. 261-0340 & 261-0356.
Ball valve coloro type 355 PVC-U with solvent ...
Description:
Ball valve coloro type 355 PVC-U with solvent cement sockets, ideally suited to use within water-based applications such as, agriculture, swimming pools, fish farming and irrigation. Solvent cement socketsEPDM Seal MaterialsLever blue.