Nexperia PBLS6024D,115, Dual Power Switch IC, High Side Switch 6-Pin, TSOP

  • RS-stocknr. 153-2937
  • Fabrikantnummer PBLS6024D,115
  • Fabrikant Nexperia
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

60 V, 1.5 A PNP BISS loadswitch, PNP low VCEsat Breakthrough In Small Signal (BISS) transistor and NPN Resistor- Equipped Transistor (RET) in a SOT457 (SC-74) small Surface-Mounted Device (SMD) plastic package.

Low VCEsat (BISS) and resistor-equipped transistor in one packageLow threshold voltage (<1 V) compared to MOSFETSpace-saving solutionReduction of component countAEC-Q101 qualifiedSupply line switchesBattery charger switchesHigh-side switches for LEDs, drivers and backlightsPortable equipment

Specificaties
Kenmerk Waarde
Power Switch Type High Side Switch
Power Switch Topology High Side
Number of Channels 2
Maximum Operating Supply Voltage -60 V
Maximum Operating Current -1.5A
Mounting Type Surface Mount
Package Type TSOP
Pin Count 6
Maximum Operating Temperature +150 °C
Minimum Operating Temperature -55 °C
Dimensions 3.1 x 1.7 x 1.1mm
Series PBLS
Automotive Standard AEC-Q101
8950 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 25)
0,096
(excl. BTW)
0,116
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 +
0,096 €
2,40 €
*prijsindicatie
Verpakkingsopties
Related Products
Linear Technology product series of synchronous and non-synchronous ...
Description:
Linear Technology product series of synchronous and non-synchronous internal switching regulator ICs offer high efficiency plus a wide input voltage range and switching frequencies up to 4MHz.The controllers span over several types of configurations from buck (step-down), boost (step-up), buck-boost, ...
Up to 48 V power supplyTwo output configurations: ...
Description:
Up to 48 V power supplyTwo output configurations: Load to Ground (High Side Mode) and Load to positive Supply Voltage (Low side Mode)Indicator status LED driverAdjustable delay at switch-onHigh burst immunity+5 V regulated auxiliary voltageThermal shutdownSupply and output reversal protection. ...
Compact low-cost switch ICs which can be used ...
Description:
Compact low-cost switch ICs which can be used to eliminate losses in resistive signal paths connected between high-voltage rails and switching power supply controllers. Typical applications include the feed-forward or feedback signal paths in PFC systems and power converters. The ...
Description:
The FPF2895 features a 28 V and 5 A rated current limit power switch, which offers Over-Current Protection (OCP), Over-Voltage Protection (OVP), and True Reverse Current Block (TRCB) to protect system. It has low On-resistance of typical 27 mΩ with ...