DIN Rail Mounting Kit for use with SIMATIC PS307, SITOP

  • RS-stocknr. 751-6741
  • Fabrikantnummer 6EP1971-1BA00
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AU
Productomschrijving

SITOP Accessories

Mounting Bracket

Combining a SITOP power supply and a 90° mounting bracket results in a minimum surface area requirement on the rear panel of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for control cabinets with a depth of 320 mm or more.

Mounting Adapter for Standard Mounting Rail

The single phase 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 PSUs are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6ES7390-6BA00-0AA0) for mounting on the standard mounting rail EN 60715 35 x 15 is separately available as an accessory.

The 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0 and 6ES7307-1KA02-0AA0 PSUs are variants for SIMATIC S7-300 and can be mounted on S7 rails.

A mounting adapter (6EP1971-1BA00) for installation on DIN Rail EN 60715 35´15/7.5 is separately available as an accessory.

Connection Plug for Devices with Degrees of Protection IP65 and IP67

For the maintenance free SITOP UPS500P DC UPS modules (6EP1933-2NC01, 6EP1933-2NC11) in IP65 degree of protection. A connector set (6EP1975-2ES00) for input and output and with a pre-assembled USB cable (2 m long) is available as an accessory.

Device Labels

Blank device labelling plates (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used for identification of the power supplies. The package unit comprises 340 labels on frames, 20 labels per frame. For usability, refer to "Accessories" in the technical data of the respective power supplies.

Specificaties
Kenmerk Waarde
Accessory Type DIN Rail Mounting Kit
For Use With SIMATIC PS307, SITOP
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
28,63
(excl. BTW)
34,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
28,63 €
5 - 9
27,48 €
10 +
26,57 €
Related Products
Range of compact transformers for mounting onto chassis ...
Description:
Range of compact transformers for mounting onto chassis or omega rail up to 160 VA using 2 clips (stock no. 423-2201).All higher values are compatible with Stock no. 620-3592All models are fitted with a top cover.
XP Power DIN rail clip kits are an ...
Description:
XP Power DIN rail clip kits are an essential accessory for the DTE20 Series. The clips are made from a flame retardant, black nylon and include hardware, screws and a drilling template.
Australian AC Head suitable for 6, 18 & ...
Description:
Australian AC Head suitable for 6, 18 & 40 Watt range of Plug & Go Power supplies.
A cover kit and top fan cover kit ...
Description:
A cover kit and top fan cover kit both sold separately designed for use with the UCP225 Series Power Supply.