Chauvin Arnoux C.A 8220 Power Quality Analyser

Wetgeving en conformiteit
Land van herkomst: FR

CA8220 Power Analyser

The CA8220 is optimised for maintenance and troubleshooting of electrical equipment, electrical systems and in single phase and balance three phase systems.,The CA8220 includes measurements for testing and monitoring rotating machines in operation. including temperature, current , duration of in-rush current, resistance of windings and rotation speed.

Large backlit 173-segment LCD display.
Power measurement up to 250kW (dependant on clamp selection)
600V rms and up to 6,500A (with clamps)
Harmonics (IEC 1000-4-7) display up to 50th order
MIN, MAX, AVERAGE, PEAK and Crest Factor display
W, VA, VAR power, DF, THD, CosΦ
Inrush current measurements – Max instantaneous value; Max RMS half-cycle current value and duration of motor start.
RPM rotation speed
Resistance measurement
Simultaneous recording of all parameters, alarms and motor start up currents.
RS232 direct output to PC
2 wire PT100 temperature probe input
Select AC current probes separately :-
Ampflex A193: 10 to 6500Aac (10Hz to 20kHz) 450mm long flexible probe (rs 236-565)
MN93A: 0.2 to 120Aac (40Hz to 10kHz): Jaw size 20mm dia. (rs 236-559)
IP54 Rated

Supplied with

Supplied with 6 off AA alkaline batteries, test leads, 4mm test probes, crocodile clips, RS232/USB optical cable and instructions

Kenmerk Waarde
Absolute Maximum Current Measurement 6500A
Number of Phases 1, 3
Maximum Voltage 600V ac
Best Voltage Measurement Accuracy ±0.5% +2 Digits
Best Current Measurement Accuracy ±0.1% + 1 Digit
Display Type LCD
Measurement Type Current, Energy, Frequency, Harmonics, Inrush Current, Voltage
Interface Type RS232, USB
Power Source Battery
Battery Type AA
Weight 840g
Dimensions 211 x 108 x 60mm
Minimum Frequency 40 Hz
Maximum Frequency 70Hz
Length 211mm
Width 108mm
Model Number p C.A 8220
Height 60mm
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
727,00 €
Related Products
Three-phase energy and power failure analyserPower and energy ...
Three-phase energy and power failure analyserPower and energy analysis in supply networksHarmonics analysis in accordance with EN 61000-4-7Network quality in accordance with EN50160 with statistical bar chartFlicker analysis as per standard EN 61000-4-15Recording of power-on operations and errorsAnalysis module ...
RS PRO IPM3600 is a great value 3-phase ...
RS PRO IPM3600 is a great value 3-phase power analyser for portable measurement and diagnosing power problems in electrical installations and power circuits within public mains supplies. The software allows the power analyser to: communicate with a PC via the ...
The 6812C AC power source/analyser from Keysight is ...
The 6812C AC power source/analyser from Keysight is a performance AC test solution with 375 VA maximum output power and a built-in arbitrary waveform generator. 20 Vrms test signal (Option 001)High-speed measurements: 5.6 ms201 points list sweepVersatile PC connectivity (LAN, ...
The Rohde & Schwarz Power analyser is the ...
The Rohde & Schwarz Power analyser is the first compact tester for AC/DC load and standby current characterisation to enable measurements without extra requirements such as computers or remote infrastructure. It features a numerical and graphical display with 26 key ...