Okdo Servo Interface Expansion Module with Servo for Micro:bit and Arduino
- RS-stocknr.:
- 257-6797
- Fabrikantnummer:
- TS2172-A
- Fabrikant:
- Okdo
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06/08/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 7,09
(excl. BTW)
€ 8,58
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 7,09 |
| 5 - 9 | € 6,85 |
| 10 + | € 6,70 |
- RS-stocknr.:
- 257-6797
- Fabrikantnummer:
- TS2172-A
- Fabrikant:
- Okdo
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
The Okdo TelePort servo expansion board and a servo. When we make an experiment with an TelePort control board and a servo, a TelePort servo module is needed. The servo shield has three pin headers of 2.54mm pin pitch, fully compatible with the port of the servo . In general, the servo has three lines in brown, red and orange. The brown wire is grounded, the red one is a positive pole line and the orange one is a signal line.
Compatible with RJ11 6P6C OKdo TelePort Control boards and expansion shields
Easily connect the included 0˚-180˚ servo or other servos to your microcontroller withthisshield
Operating voltage between 4.8V to 6V
Easily connect the included 0˚-180˚ servo or other servos to your microcontroller withthisshield
Operating voltage between 4.8V to 6V
Specificaties
Kenmerk | Waarde |
|---|---|
| For Use With | Micro:bit and Arduino |
| Kit Classification | Module |
| Kit Name | Servo Interface Expansion Module with Servo |