Datasheet MTRCPE-BBBCAPE

Atlas

The Pmod DPG1 is a differential pressure gauge module featuring an NXP MP3V5010DP piezoresistive transducer and a Texas Instruments ADCS7476 12-bit ADC. &#149; 0 to 10kPa differential pressure range&#149; Temperature compensated and calibrated&#149; Host communication: SPI bus&#149; Follows Digilent Pmod ...

The Pmod DPG1 is a differential pressure gauge

Digilent, DC Motor Controller, Voltage Control, 3.125 →

Operative voltage from 7 to 45 VOutput current up to 1.5 ArmsSupporting single shunt and three-shunt sensingStandby modeFlexible direct driving settable between 3 or 6 PWM inputsCurrent limiter with adjustable referenceOvercurrent, short-circuit and interlocking protectionsThermal shutdown and undervoltage ...

Operative voltage from 7 to 45 VOutput current

STMicroelectronics X-NUCLEO-IHM16M1 Three-Phase Brushless DC

Position Sensorless BLDC Drivers (no Hall Sensor required)180° Sinusoidal Drive for High Efficiency and Low Acoustic NoiseSupports 2V to 14V Power SuppliesSpeed Control through Power Supply Modulation (PSM) and/or Pulse-Width Modulation (PWM)Built-In Frequency Generator (FG output signal)Built-In Lock-Up ...

Position Sensorless BLDC Drivers (no Hall Sensor required)180°

Development Kit Brushless 4 Click for use with

Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...

Supports up to 20V Output Pull-up Voltage–40°C to

Aantal stuks	Per stuk
1 - 4	36,00 €
5 +	35,82 €

Kenmerk	Waarde
Kit Classification	Evaluation Kit
For Use With	BeagleBoard Black

Beagleboard.org - MTRCPE-BBBCAPE

Related Products

Related Items

Related Categories