STMicroelectronics X-NUCLEO-IHM05A1 X-Nucleo-IHM Stepper Motor Driver for STM32 Nucleo Boards

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

X-NUCLEO-IHM05A1 Bipolar Stepper Motor Driver Expansion Board

The X-NUCLEO-IHM05A1 is a bipolar stepper motor driver expansion board, based on the L6208 driver for two-phase bipolar stepper motors. An affordable and easy-to-use DMOS driver for bipolar stepper motors in STM32 Nucleo projects. The board connectors are compatible with the Arduino UNO R3 connectors, and the STMicroelectronics Morpho connectors. The addition of other STM32 expansion boards is supported.

8 V to 50 V operating Voltage
Up to 2.8 A RMS output peak current per a phase
Dual independent PWM current controllers
Fast and slow decay mode selection
Logic sequence generation for stepper motors
Full-step and half-step mode drives
Overcurrent protection
Thermal protection shuntdown
Compatible with Arduino UNO R3 connector
Compatible with STM32 Nucleo boards

Motor Controllers & Drivers, STMicroelectronics

Specificaties
Kenmerk Waarde
Power Management Function Stepper Motor Driver
Kit Classification Expansion Board
For Use With STM32 Nucleo Boards
Kit Name X-Nucleo-IHM
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
59 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,19
(excl. BTW)
13,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
11,19 €
Related Products
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...
xChips are a rapid electronics development ecosystem to ...
Description:
xChips are a rapid electronics development ecosystem to help reduce development time and simplify making custom products as well as aiding learning. Without soldering, wiring, breadboarding, or hardware knowledge you can assemble a circuit in minutes, and concentrate on coding.xChips ...
This 18-channel R/C servomotor driver shield is designed ...
Description:
This 18-channel R/C servomotor driver shield is designed for the Arduino UNO microcontroller board but is compatible with all other Arduino boards and the Raspberry Pi via the high speed I²C interface. Typical applications include humanoid and multi-limbed 'walking' format ...
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and ...
Description:
The HIP2103_4MBEVAL1Z mother board with the HIP2103DBEVAL1Z and HIP2104DBEVAL1Z evaluation daughter cards constitute an evaluation tool for the HIP2103 and HIP2104 half bridge MOSFET drivers.The motherboard platform provides an on-board microcontroller that is used to generate appropriate control inputs to ...