Bourns RS-485EVALBOARD2 RS-485 Port Protection

  • RS-stocknr. 743-2508
  • Fabrikantnummer RS-485EVALBOARD2
  • Fabrikant Bourns
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

RS-485 Evaluation Boards

Bourns RS-485 evaluation boards are a design resource that streamlines evaluating circuit protection on RS-485 serial device ports. The Bourns RS-485EVALBOARD1 includes two Bourns® TBU® High-Speed Protectors (HSPs), two Bourns® fast-acting GDTs and two Bourns® TVS diodes. The Bourns RS-485EVALBOARD2 uses Bourns® TBU® High-Speed Protectors (HSPs), MOVs and TVS products. Both boards offer enhanced high-speed performance features over competing technologies, which can help the design engineer increase the surge and transient protection level on RS-485 ports and place the entire circuit protection solution into a smaller reduced PCB area and are manufactured using FR4 PCB with nickel gold plating on top and bottom sides.

Extremely high-speed performance
Small size requires minimal PCB area

Transient Voltage Suppressors

Specificaties
Kenmerk Waarde
Power Management Function RS-485 Port Protection
Kit Classification Reference Design
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/04/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
13,03
(excl. BTW)
15,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
13,03 €
Related Products
The MCP19215 Dual Channel Controller Evaluation Board demonstrates ...
Description:
The MCP19215 Dual Channel Controller Evaluation Board demonstrates how the MCP19215 device operates in Boost and SEPIC topologies over a wide input voltage and load range. Nearly all operational and control system parameters are programmable by utilizing the integrated PIC ...
The NCP1406 is a monolithic micropower PFM step-up ...
Description:
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, ...
The demo board supports the LDO regulator NCP3337 ...
Description:
The demo board supports the LDO regulator NCP3337 in DFN10 package with adjustable output voltage. The ENABLE function allows turn the device to low consumption mode with quiescent current below 1 μA. The Power Good pin allows output voltage monitoring. ...
The NCP330MUTBGEVB evaluation board is designed to quickly ...
Description:
The NCP330MUTBGEVB evaluation board is designed to quickly test the NCP330 which is a low Ron N-channel MOSFET controlled by a soft-start sequence of 2 ms for mobile applications. +/-2.0% Output Accuracy, Over Full Temperature Range34 uA Maximum Quiescent Current ...