ON Semiconductor NCP334FCT2GEVB Controlled Load Switch with Auto-Discharge Path Evaluation Board Load Switch

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The NCP334FCT2GEVB evaluation board is designed to quickly test the NCP334, a very low Ron MOSFETs controlled by an external logic pin, allowing optimization of battery life, and portable device autonomy.

Specificaties
Kenmerk Waarde
Power Management Function Load Switch
Kit Classification Evaluation Board
For Use With Controlled Load Switch with Auto-Discharge Path
Featured Device NCP334FCT2G
Kit Name Controlled Load Switch with Auto-Discharge Path Evaluation Board
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
52,90
(excl. BTW)
64,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
52,90 €
Related Products
The OMNIFET series of fully auto-protected low-side drivers, ...
Description:
The OMNIFET series of fully auto-protected low-side drivers, are measured on the criteria of ruggedness and improved reliability. These solid state power switches are designed for inductive or resistive loads, especially in the automotive environment. Linear current limitationThermal shut downShort ...
Evaluation board for the NCP160 linear regulator capable ...
Description:
Evaluation board for the NCP160 linear regulator capable of supplying 250 mA output current. Designed to meet the requirements of RF and analogue circuits, the NCP160 device provides low noise, high PSRR, low quiescent current, and very good load/line transients. ...
The NCP1406 is a monolithic micropower PFM step-up ...
Description:
The NCP1406 is a monolithic micropower PFM step-up DC-DC converter. This device is designed to boost single lithium or two cells AA/AAA battery voltage up to 25 V (with internal MOSFET) output for handheld applications. Target applications include OLED Power, ...
The NCP101X series integrates a fixed-frequency current-mode controller ...
Description:
The NCP101X series integrates a fixed-frequency current-mode controller and a 700 V voltage MOSFET. Housed in a PDIP7 package, the NCP101X offers everything needed to build a rugged and low-cost power supply, including soft-start, frequency jittering, short-circuit protection, skip-cycle, a ...