Adafruit 2923 FeatherWing Latching Relay for Adafruit Feather

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Adafruit Latching Mini Relay FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The latching mini relay FeatherWing gives you control over power so you can now turn on and off various devices including lamps, fans, solenoids. In fact, you can switch power for many small appliances that run on up to 250 V ac but you need check the amount of power – 60 W or less.

The latching relay, requires two pins, a SET and UNSET. Instead of keeping the SET pin high, you only have to pulse each pin high for 10 ms to latch the relay open or closed. You need two pins but save power.

In terms of how much power, you can switch up to 2A of resistive current at up to 30 V dc or 40 V ac. At 110 V dc, switch up to 0.3A, at 120 V ac up to 0.5 A, and at 250 V ac you can switch up to 0.6A. Check the datasheet for more details.

A 3-pin terminal block is supplied with this FeatherWing to wire it up with the device you are controlling and some light soldering is required.

A Non-Latching Relay FeatherWing is also available (RS 124-5530) and requires only a single signal pin.

50.8 x 22.9 x 11.4 mm / 2" x 0.9" x 0.45"
Weight: 5.3 g

Note

If using with high voltages of more than 24 V, use care and common sense. High voltages require experience, and are only for use by engineers who are comfortable with guidelines and know how to use it safely.

Adafruit FeatherWing Add-On Boards

Specificaties
Kenmerk Waarde
Power Management Function Latching Relay
Kit Classification Development Board
For Use With Adafruit Feather
Kit Name FeatherWing
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
7,11
(excl. BTW)
8,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
7,11 €
Related Products
RTX high inrush relays from TE Connectivity. Developed ...
Description:
RTX high inrush relays from TE Connectivity. Developed to meet the standard of IEC 60669-1. Handles up to 320A inrush and make/break capacities of 16A at 250 V ac. The relay has contact opening features to overcome possible contact microwelds ...
Omron's G6S range of surface mounting relays. Fully ...
Description:
Omron's G6S range of surface mounting relays. Fully sealed constructionHigh dielectric strength between coil and contacts (2000Vac) and between contacts of different polarity (1500Vac)High impulse withstand voltages between coil and contacts, and between contacts of different polarity (2500V, 2x10 μs: ...
Range of plug-in automation relays on an RHZ-21-type ...
Description:
Range of plug-in automation relays on an RHZ-21-type base.The pivoting front face has three functions: removal latch, dust protection and protection from moving components, and stop-locking.Relay self-locks onto the base by snap-fitting.
Switch power: 10A version: 1100W, 5A version 660WContact ...
Description:
Switch power: 10A version: 1100W, 5A version 660WContact resistance: 100mΩIsolation coil to contact: 2000VacOperating temperature range: -55 to +70°CMaximum switching voltage: 250Vac; 125VdcContact material: AgNiDimensions: H42.4mm x W21.5mm x D28mm.