Sollatek Voltage Stabilizer 230V ac 4A Over Voltage and Under Voltage, Surge, 920VA, Chassis

  • RS-stocknr. 251-3974
  • Fabrikantnummer 98504122-E
  • Fabrikant Sollatek
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

OEM Design-In-Type Voltage Stabilisers

Applications include fridges, freezers, air conditioning and coolers
Designed to accurately stabilise large variations of mains voltage
Includes lightning surge/spike protection
Disconnects output when mains voltage is too high or too low
3 minute wait period to allow compressor gases to neutralise before re-connection of output
1kVA type is available in production bulk packs of 8 units

Specificaties
Kenmerk Waarde
Input Voltage 230V ac
Output Voltage 230V ac
Output Power 920VA
Output Current 4A
Mounting Type Chassis
Maximum Operating Frequency 75Hz
Maximum Temperature +55°C
Minimum Operating Frequency 45Hz
Minimum Temperature 0°C
Wiring Configuration L N E
Electrical Phase 1
Standards Met ISO9001:2008
Voltage Protection Mode Under and Over Voltage
Protection Type Over Voltage and Under Voltage, Surge
36 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
83,55
(excl. BTW)
101,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
83,55 €
25 - 49
77,74 €
50 - 99
75,10 €
100 - 199
72,22 €
200 +
70,84 €
Related Products
Sollatek Voltshield AC Guards have been developed for ...
Description:
Sollatek Voltshield AC Guards have been developed for use with office and home Air Conditioning equipment (including split units) and commercial and industrial refrigeration equipment. Voltshield AC Guards protect Air Conditioning and refrigeration units from low voltage ’brownouts’, power fluctuations, ...
Mains spike/surge protection devices that are ideal for ...
Description:
Mains spike/surge protection devices that are ideal for protecting all sensitive electronic equipment. Protection from voltage transients that can occur between phases (L-N, L-E, N-E)Designed to be installed close to the incoming electrical supply panelWired in parallel with the supplyThe ...
Range of portable startup current limiting devices for ...
Description:
Range of portable startup current limiting devices for use with transformers and power tools onlyNo load detection resets the protection even for momentary supply changesRated to IP65, with various connection choicesRated Voltage 115 to 230 Vac, maximum pass through current ...
Starting Current Limiter has a typical intrinsic resistance ...
Description:
Starting Current Limiter has a typical intrinsic resistance of 3.75Ω, which is in series connection with the loadAfter 3 periods (at 50Hz) the built-in power relay bridges the 3.75Ω-resistor to allow full power to be appliedNominal voltage 220 to 400 ...