Hi-Force Single Portable Hydraulic Cylinder - Hollow Pulling Type HHS302, 33T, 50mm

  • RS-stocknr. 808-135
  • Fabrikantnummer HHS302
  • Fabrikant Hi-Force
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Hollow Cylinders - High Pressure

The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing mode
The replacement saddle is threaded to screw into the threaded counter-bore of the piston rod
The plain bore maintains the through bore of the piston rod

//media.rs-online.com/t_line/L808113-01.gif

Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard.
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps

Warning

  • Saftey Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specificaties
Kenmerk Waarde
Manufacturer Series HHS
Single/Double Acting Single
Capacity 33t
Stroke 50mm
Closed Height 165mm
Extended Height 215mm
Cylinder Effective Area 46.7cm²
Oil Capacity 233cm³
Centre Hole Diameter 60mm
Outside Diameter 92mm
Maximum Operating Pressure 700 bar
Weight 10.6kg
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
675,25
(excl. BTW)
817,05
(incl. BTW)
Aantal stuks
Per stuk
1 +
675,25 €
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
Piston-type hand pumps offer completely self-contained units for ...
Description:
Piston-type hand pumps offer completely self-contained units for instant operation. Each pump consists of a pre-filled oil reservoir, pump head with external load release valve, and an operating lever. The two-speed model HP227 (807-895) enables rapid cylinder rod advancement until ...
The 'turbo ' air operated hydraulic pump utilises ...
Description:
The 'turbo ' air operated hydraulic pump utilises exhaust air to help power the pump, developing 700 bar hydraulic pressure with only 5.5 bar air supply. The air control and valve functions can be easily operated by foot or hand ...
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...