SMC Pneumatic Roundline Cylinder 38.1mm Bore, 508mm Stroke, NCM Series, Double Acting

  • RS-stocknr. 844-4574
  • Fabrikantnummer NCDMC150-2000-XC6
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: JP
Productomschrijving

SMC NCM Series Cylinders

The SMC NCM series of stainless steel pneumatic cylinders offer high performance, a compact design for space savings, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is auto-switch capable without any change in cylinder dimension. Available in a wide range of bore sizes and stroke lengths.

SMC Roundline Cylinders

Specificaties
Kenmerk Waarde
Manufacturer Series NCM
Action Double
Bore 38.1mm
Stroke 508mm
Maximum Operating Pressure 1.7 MPa
Cushioning Type Not Cushioned
Dimensions 1.56 (Dia.) x 25.5in
Weight 819.3g
Maximum Operating Temperature +60°C
Minimum Operating Temperature +5°C
Diameter 39.62mm
Length 647.7mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/08/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
229,74
(excl. BTW)
277,99
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
229,74 €
5 - 9
222,72 €
10 +
215,56 €
Related Products
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...
The SMC CP96-C series double-acting pneumatic cylinders feature ...
Description:
The SMC CP96-C series double-acting pneumatic cylinders feature both air and bumper cushioning. Using both air and bumper cushioning reduces the length of the cushion stroke reducing cycle time and the noise at the end of the stroke. CP96-C cylinder ...