Festo Pneumatic Cylinder 16mm Bore, 160mm Stroke, DSNU Series, Double Acting

  • RS-stocknr. 136-6870
  • Fabrikantnummer DSNU-16-160-PPS-A
  • Fabrikant Festo
Wetgeving en conformiteit
Land van herkomst: DE

DSNU Series Roundline Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSNU series round pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a stainless steel piston rod within a 3 component system that provides excellent running performance and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. An extensive range of accessories makes it possible to install the DSNU cylinders virtually anywhere.

Self Adjusting Pneumatic Cushioning

The DSNU PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Conforms to ISO 6432 providing standardised metric mounting dimensions
Stainless steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications.
Long service life
Double acting operation

How do I mount the pneumatic cylinder?

The DSNU series pneumatic round actuators conform to ISO 6432 standards allowing them to be mounted in any position to suit the required application. The ISO 6432 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo Roundline Cylinders

Kenmerk Waarde
Manufacturer Series DSNU
Action Double
Bore 16mm
Stroke 160mm
Pneumatic Connection M5
Maximum Operating Pressure 10 bar
Piston Rod Thread Gender Male
Cushioning Type Air
Dimensions 20 x 271mm
Weight 163.5g
Maximum Operating Temperature +80°C
Diameter 20mm
Length 271mm
Minimum Operating Temperature -20°C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
49,99 €
Related Products
The Festo round cylinder used for position sensing ...
The Festo round cylinder used for position sensing with self-adjusting pneumatic cushioning which is adjustable at both end-position. It has piston rod thread is M10x1.25 and stroke size is 200mm. Ambient temperature is -20°C to 80 °CHigh alloy steel material ...
The Festo CRDSNU series double-acting round cylinder has ...
The Festo CRDSNU series double-acting round cylinder has a pneumatic cushioning, self-adjusting at both ends for proximity sensor. It is a piston rod cylinder barrel design structure made of non-corrosive, high-alloy steel. Stroke = 200 mmPiston diameter = 32 mmAssembly ...