Festo Pneumatic Cylinder 50mm Bore, 300mm Stroke, DSBC Series, Double Acting

  • RS-stocknr. 121-4775
  • Fabrikantnummer DSBC-50-300-PPSA-N3
  • Fabrikant Festo
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

DSBC Series Profile Cylinders - Self Adjusting Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with self adjusting pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Self Adjusting Pneumatic Cushioning

The DSBC PPS type self adjusting cushioning pneumatic cylinders provide ideal cushion performance without the need for manual adjustments. The self adjusting cushioning gives a gentle and dynamic travel into the end position, even with changing loads and speeds. Equipped with a special piston as an extension to the main piston the design controls venting of the air cushion that has built up, as a result, no adjusting screw is necessary. Assembly and setting time is reduced using self adjusting cushioning that results in a high potential saving of working hours.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Specificaties
Kenmerk Waarde
Manufacturer Series DSBC
Action Double
Bore 50mm
Stroke 300mm
VDMA Standard 24562
Pneumatic Connection G 1/4
ISO Standard 15552
Piston Rod Thread Gender Male
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 477.8 x 64 x 64mm
Weight 1.2kg
Minimum Operating Temperature -20°C
Height 64mm
Maximum Operating Temperature +80°C
Test Weight 1190 g @ 0 mm Stroke
Width 64mm
Stroke Interval Weight 56 g @ 10 mm Stroke
Length 477.8mm
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
156,17
(excl. BTW)
188,97
(incl. BTW)
Aantal stuks
Per stuk
1 +
156,17 €
Related Products
Festo DSBC series pneumatic cylinders with adjustable pneumatic ...
Description:
Festo DSBC series pneumatic cylinders with adjustable pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual ...
RS Pro double-acting pneumatic cylinders according to ISO ...
Description:
RS Pro double-acting pneumatic cylinders according to ISO 15552 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry ...
The Festo ISO cylinder DSBC-50-100-D3-PPVA-N3 with self-adjusting pneumatic ...
Description:
The Festo ISO cylinder DSBC-50-100-D3-PPVA-N3 with self-adjusting pneumatic end position cushioning. It has stroke 100 mm, piston diameter 50 mm and piston rod thread M16x1,5. It has stroke 100 mmPiston diameter 50 mmPiston rod thread M16x1,5Cushioning. PPV.
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting ...
Description:
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting and through-rod versionsMagnetic piston as standardClean line cylinderStainless steel piston rodIntegral reed switch slotSeal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)Complete with piston rod nut.