SMC AK Check Valve, Rc 1 Female Port, 0.02 → 1Mpa

  • RS-stocknr. 826-8106
  • Fabrikantnummer AK6000-10
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

SMC AK/AKH/AKB Series Check Valves

With their various configurations the AK/AKH/AKB series check valves offer designers multiple solutions based on operating conditions. They are compact, lightweight and have a low cracking pressure. Thanks to its straight type, one-touch fitting, the AKH is ideal for installing in pipelines while the male connector type can be mounted directly onto equipment. The AKB bushing type is ideal for applications with splashing coolant and splatter.

Check valve with high flow capacity
Compact and lightweight
Variety of models
Male connector type
Easily mounted onto equipment
One-touch fittings
Low cracking pressure
Can be used for vacuum

Specificaties
Kenmerk Waarde
Manufacturer Series AK
Outlet Connection Type Threaded
Threaded Outlet Connection Rc 1 Female
Cracking Pressure 0.02MPa
Minimum Operating Pressure 0.02MPa
Maximum Operating Pressure 1 (Operating) MPa, 1.5 (Proof) MPa
Maximum Operating Temperature +60°C
Threaded Outlet Gender Female
Operating Pressure Range 0.02 → 1MPa
Threaded Outlet Thread Size 1 in
Threaded Outlet Thread Standard Rc
Minimum Operating Temperature -5°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
47,16
(excl. BTW)
57,06
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
47,16 €
5 - 9
45,72 €
10 +
44,24 €
Related Products
The Floguard range of double check valves is ...
Description:
The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999.Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with ...
Two non-return check valves which permit the free ...
Description:
Two non-return check valves which permit the free flow of air in one direction only, protecting the downstream side of the supply in event of an air supply failure. Manufactured from brass with nitrile rubber seals.Operating temperature : -20 to ...
Integral push in fitting connections for fast inline ...
Description:
Integral push in fitting connections for fast inline installation. These fittings are compact and lightweight with the advantage of one-touch fitting. Easily installed into your pneumatic installations. • Can be used in compressed air or vacuum lines• Suitable for use ...
Permits free flow of air in one direction ...
Description:
Permits free flow of air in one direction onlySilicone free constructionReliable, lightweight design with aluminium bodyOperating temperature range : -20 to +80°C.