Festo 500 mm Pneumatic Cylinder - 1908258 DSNU Series, Double Acting Acting

RS-stocknr.:: 121-4706
Artikelnummer Distrelec:: 301-70-154
Fabrikantnummer:: DSNU-12-60-P-A
Fabrikant:: Festo

Festo 500 mm Pneumatic Cylinder - 1908258 DSNU Series, Double Acting Acting

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 45,10

(excl. BTW)

€ 54,57

(incl. BTW)

GRATIS bezorging voor bestellingen vanaf € 90,00

Op voorraad

3 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 45,10
5 - 9	€ 43,29
10 +	€ 41,52

*prijsindicatie

RS-stocknr.:: 121-4706
Artikelnummer Distrelec:: 301-70-154
Fabrikantnummer:: DSNU-12-60-P-A
Fabrikant:: Festo

Specificaties

Datasheets

Wetgeving en conformiteit

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Festo
	Series	DSNU
	Product Type	Pneumatic Cylinder
	Action Type	Double Acting
	Model Number	1908258
	Mount Type	Foot, Swivel, Direct, Rear, Flange, Front
	Cushioning Type	Elastomer
	Length	165mm
	Stroke Length	500mm
	Piston Rod Thread Standard	Metric
	Maximum Piston Speed	1000mm/s
	Piston Rod Gender	Male/Female
	Maximum Operating Temperature	80°C
	Standards/Approvals	ISO 6432, CE, Germanischer Lloyd, ISO 228-1, ISO 1179-1, ATEX II 2GD

	Alles selecteren
	Merk Festo
	Series DSNU
	Product Type Pneumatic Cylinder
	Action Type Double Acting
	Model Number 1908258
	Mount Type Foot, Swivel, Direct, Rear, Flange, Front
	Cushioning Type Elastomer
	Length 165mm
	Stroke Length 500mm
	Piston Rod Thread Standard Metric
	Maximum Piston Speed 1000mm/s
	Piston Rod Gender Male/Female
	Maximum Operating Temperature 80°C
	Standards/Approvals ISO 6432, CE, Germanischer Lloyd, ISO 228-1, ISO 1179-1, ATEX II 2GD

Land van herkomst:: DE

Festo Pneumatic Cylinder, M6 Piston Rod Thread, M5 Pneumatic Connection - DSNU-12-60-P-A

Looking for a positioning component you can use in a tight squeeze? Try this pneumatic cylinder from Festo. Its round design and short stroke length of 60mm saves space, so it's just what you need when there's not much elbow room in your setup. Flexible cushioning plates on each end cuts down on vibration and impact stress to deliver a long performance life with minimal risk of component damage. You also benefit from reduced noise and a quieter working environment. This cylinder's wide operating pressure range between 1.5 and 10 bar makes it a good match for a whole host of pneumatic circuits.

Features & Benefits

• Compatible with either lubricated or non-lubricated compressed air for versatility

• High-alloy steel piston rod and barrel resist corrosion in humid settings

• Optional mounting positions to best suit your setup

• Suitable to use in extreme conditions, thanks to its ambient operating temperature range between -20°C and +80°C

Applications

• Lifting and hoisting equipment

• Textile industry

• Pharmaceutical manufacturing

• Breweries

What are this cylinder's seals made from?

The cylinder has nitrile rubber and thermoplastic seals that are especially hardwearing, so you get an extended service life even at high pressures.

DSNU Series Roundline Cylinders - Flexible Cushioning

Festo DSNU series round pneumatic cylinders with flexible cushioning rings at both ends of the actuator barrel. Featuring a stainless steel piston rod within a 3 component system that provides excellent running performance and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. An extensive range of accessories makes it possible to install the DSNU cylinders virtually anywhere.

Flexible Cushioning

The DSNU P type flexible cushioning pneumatic cylinders absorb energy directly via flexible cushioning rings which are integrated into the main piston. This energy absorbing method makes these cylinders ideal for small load and low speed applications.

Features and Benefits

Conforms to ISO 6432 providing standardised metric mounting dimensions

Stainless steel piston rod with threaded connector

Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications.

Long service life

Double acting operation

How do I mount the pneumatic cylinder?

The DSNU series pneumatic round actuators conform to ISO 6432 standards allowing them to be mounted in any position to suit the required application. The ISO 6432 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.