RS PRO Double Action Pneumatic Pin Cylinder

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

RS Pro double-acting MINI CYLINDERS according to ISO 6432 suitable for
filtered and lubricated compressed air, as well as non lubricated air.
- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)
- Temperature Range: 0 °C (-20 °C with dry air) to + 80 °C

Specificaties
Kenmerk Waarde
Action Double
Bore 20mm
Stroke 80mm
Maximum Operating Pressure 10 bar
Cushioning Type Not Cushioned
Force at 7 bar 168 (Traction) N, 196 (Thrust) N
Dimensions 27 Dia. x 211mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +80°C
Diameter 27mm
Length 211mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
52,10
(excl. BTW)
63,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
52,10 €
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...