Legris Pneumatic Fittings Maintenance Kit

  • RS-stocknr. 175-7095
  • Fabrikantnummer 3650 00 00 22
  • Fabrikant Legris
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Legris Pneumatic Fittings Maintenance Kit

The Legris pneumatic fittings maintenance kit is used to reduce production interruptions and essentially carry out rapid maintenance operations. It is resistant to temperature up to 150°C at 30bar pressure. It shows excellent mechanical performance and enables the application to perform more easily.

Features and Benefits

• A selection of 232 references covering the most used products
• Excellent abrasion and corrosion resistant
• High mechanical performance
• Parallel thread -BSPP

Applications

• Industrial applications
• Vehicle applications

Specificaties
Kenmerk Waarde
Kit Contents Nylon Tube Cutter, 4 mm Blanking Plug, 4 mm Equal Connector, 4 mm Equal Tee, 4 mm x 6 mm Reducer, 4 mm x G1/4 Male Stud Fitting, 4 mm x G1/8 Male Stud Fitting, 4 mm x G1/8 Stud Elbow, 6 mm Blanking Plug, 6 mm Equal Connector, 6 mm Equal Elbow, 6 mm Equal Tee, 6 mm x 8 mm Reducer, 6 mm x G1/4 Male Stud Fitting, 6 mm x G1/4 Stud Elbow, 6 mm x G1/8 Male Stud Fitting, 6 mm x G1/8 Stud Elbow, 8 mm Blanking Plug, 8 mm Equal Connector, 8 mm Equal Elbow, 8 mm Equal Tee, 8 mm x G1/4 Male Stud Fitting, 8 mm x G1/4 Stud Elbow, 8 mm x G1/8 Stud Elbow
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
1.198,79
(excl. BTW)
1.450,54
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.198,79 €
Related Products
This thread identification kit from Parker is used ...
Description:
This thread identification kit from Parker is used for identifying thread forms and connection styles. It contains thread gauges, calipers, thread profiles and an instruction booklet.The instruction booklet details most thread forms and connection styles found in fluid power systems ...
Adaptors for connecting pneumatic hose at right-angles. Bolts ...
Description:
Adaptors for connecting pneumatic hose at right-angles. Bolts made from zinc-passivated steel and plastic bodiesNitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to 80°C.
Nickel-plated brass body material. Enhances the aesthetic appearance ...
Description:
Nickel-plated brass body material. Enhances the aesthetic appearance of installations and complements existing push-in fitting ranges. The items are corrosion resistant.
Shut off a circuit end. Assembly with a ...
Description:
Shut off a circuit end. Assembly with a flat wrench or an Allen wrench. Available in metric or parallel versions. Perfect sealing due to an integral 'O' ring seal.