SMC reed Pneumatic Cylinder & Actuator Switch, D-A5 Series

  • RS-stocknr. 826-2297
  • Fabrikantnummer D-A54Z
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Niet conform
Productomschrijving

Sensing Switches

A selection of reed and auto switches from SMC.

Leakage current: None
Operating time: 1.2 ms
Operating temperature: -10 to 60 °C

Standards

Enclosure: IEC60529 Standard IP67

Specificaties
Kenmerk Waarde
Manufacturer Series D-A5
Compatible With Size 10, 15 CDRB Series Rotary Actuator
Type Reed
LED Indicator Yes
Voltage Rating 200V ac
Voltage Drop ≤2.4 V @ 20 mA, ≤3.5 V @ 50 mA
IP Rating IP67
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
31,03
(excl. BTW)
37,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
31,03 €
5 - 9
30,07 €
10 +
29,11 €
Related Products
The DA-9 series reed switches utilise a magnetic ...
Description:
The DA-9 series reed switches utilise a magnetic sensor for pneumatic actuators. They come with built in indicator lights and set screws. For extra versatility they are available in both two and three wire options in both in-line and vertical ...
SMC Auto-Switches come available in a variety of ...
Description:
SMC Auto-Switches come available in a variety of options to ensure your application is covered. Mounting positions can be easily setOperating range can be set via LED indication systemPosition detection displacement can be visually checkedIncorrect detection can be prevented thanks ...
Range of static detectors with integral fittingsEasily fitted ...
Description:
Range of static detectors with integral fittingsEasily fitted to the cylinder groove on C55, MY1 series, etc.Reduced load currentExtra-flexible wireFor relays, printed circuits, programmable controllers.
The Crouzet 81 series pneumatic relay has operating ...
Description:
The Crouzet 81 series pneumatic relay has operating pressure ranging between 2bar and 8bar with 2-hand control. This pneumatic 2-hand control device is used with dangerous machinery and requires simultaneous use of both hands to trigger and maintain machine operation. ...