SMC PNP Solid State Pneumatic Switch, D-M9 Series

  • RS-stocknr. 210-250
  • Fabrikantnummer D-M9PSAPC
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: JP
Productomschrijving

SMC Solid State Switch

The SMC D-M9 series solid-state switch has a power supply voltage ranging between4.5VDC and 28VDC with 40mADC maximum load current. The switch has a 3-wire PNP output with a 500mm lead wire length. It has an internal drop voltage of 0.8VDC with a red LED indicator light. This solid-state switch is available with an M8 3-pin connector.

Features and Benefits

Operating temperature ranges between -10°C and 60°C
Flexibility is 1.5 times more as compared to the conventional products
Normally open contacts
Eliminates harnessing work by using a cable with pre-wired connector specification

Applications

Relays
PLCs
IC circuits

Certifications

IP67 rated
CE certified
UL approved

Specificaties
Kenmerk Waarde
Manufacturer Series D-M9
Compatible With C55, CE1, CJP2, CLQ, CLS, CQ2, CQM, CQS, CRJ, CRQ2, CU, CXSJ, CXT, CY1F, CY3R, E-MY2, MDHR2, MDHR3, MGT, MGZ(R), MHC2, MHF2, MHK2, MHS, MHT2, MHY2, MHZ2, MHZJ2, MHZL2, MIS, MIW, MK, MK2, MRH, MSQ, MSZ, MTS, MXF, MXH, MXJ, MXP, MXQ, MXS, MXU, MXW, MXY, MY1, MY2, MY3, REAR, REBR, RLQ, RQ, RSQ, RZQ, SGC
Type Solid State
Operation PNP
LED Indicator Yes
Voltage Rating 5 V dc, 12 V dc, 24 V dc
Voltage Drop <=0.8V
IP Rating IP67
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
103 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
99 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
39,26
(excl. BTW)
47,50
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
39,26 €
5 - 9
38,06 €
10 +
36,84 €
Related Products
Range of static detectors with integral fittingsEasily fitted ...
Description:
Range of static detectors with integral fittingsEasily fitted to the cylinder groove on C55, MY1 series, etc.Reduced load currentExtra-flexible wireFor relays, printed circuits, programmable controllers.
The SMC D-C series auto-switch has a load ...
Description:
The SMC D-C series auto-switch has a load voltage of 24VDC or 100VAC with a maximum load current of 40mADC or 20mAAC. It has an internal drop voltage of 2.4VDC with a red LED indicator light.Note:Please refer to the manufacturer's ...
The DY-7 series trimmer auto switches can detect ...
Description:
The DY-7 series trimmer auto switches can detect various size objects by the difference of more than 0.5mm. The sensor enclosure is rated IP67 and the amplifier is IP40. They are available in either rail mount or direct mount styles. ...
D-Z7 series auto switches. These pneumatic switches are ...
Description:
D-Z7 series auto switches. These pneumatic switches are compatible with various air cylinders. Reed switch actionDirect mounting PLC, relay applicable loadLED light indicator Lead wire 0.50m (Stock number 826-2082) and 5m (Stock number 826-2149)Bare wire terminals for connection.