SMC Pneumatic Compact Cylinder 63mm Bore, 50mm Stroke, CQ2 Series, Double Acting

  • RS-stocknr. 722-6981
  • Fabrikantnummer CDQ2B63TF-50DZ
  • Fabrikant SMC
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cylinders

Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs.

Space and weight saving
Magnetic piston
Proof pressure 15bar
Operating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar max
Supplied with tapered and parallel ports

Temperature range (no freezing allowed) -10ºC to +70ºC (without auto switch), -10ºC to +60ºC (with auto switch)
Internal female threaded rod ends
Nitrile seals
Lubrication not required
Suitable for solid state switches 161-782 and 161-798

Specificaties
Kenmerk Waarde
Stroke 50mm
Bore 63mm
Action Double
Manufacturer Series CQ2
Dimensions 94 x 84 x 77mm
Length 94mm
Width 84mm
Height 77mm
Maximum Operating Pressure 1 MPa
Minimum Operating Temperature -10°C
Maximum Operating Temperature +70°C
Weight 865g
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
111,87
(excl. BTW)
135,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
111,87 €
5 +
108,46 €
Related Products
Compact easy-to-install pneumatic bellows, ideal for short-stroke high-force ...
Description:
Compact easy-to-install pneumatic bellows, ideal for short-stroke high-force applications. Available in three nominal sizes, and stroke lengths from 20mm to 115mm. NORGREN single-acting compact air bellows offer frictionless operation, require no lubrication or maintenance, and high vibration isolation. PM/31000 ...
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
The MHF two finger pneumatic gripper compact design ...
Description:
The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for ...
SMC C85 cylinders conform to ISO 6432 and ...
Description:
SMC C85 cylinders conform to ISO 6432 and CETOP RP52P standards, offer 100% mounting repeatability accuracy, incorporate abrasion-resistant seals, and a replaceable piston rod seal. The cylinders are corrosion-resistant, with the barrel and piston rod manufactured from stainless steel, double-swaged ...