- RS-stocknr.:
- 213-1343
- Fabrikantnummer:
- FRB 9.5/100
- Fabrikant:
- SKF
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
44 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 8,24
(excl. BTW)
€ 9,97
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 8,24 |
- RS-stocknr.:
- 213-1343
- Fabrikantnummer:
- FRB 9.5/100
- Fabrikant:
- SKF
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
SKF Locating Ring, 45mm ID, 255mm Length - FRB 9.5/100
Keep your bearings fixed firmly in place with this locating ring from SKF. It locks onto the shaft alongside a pillow block housing to stop the inner ring from slipping out of place while your equipment is running. This helps maintain your machinery in peak condition and avoids unscheduled downtime caused by misaligned rotating parts. As this handy piece of kit is an ideal match for mounting blocks from SKF's SONL, SAF, SAW and SNLN 30 series, and also from the SNL 2, 3, 5, 6, 30, 31 and 32 series, it's a versatile choice.
Features & Benefits
Super-light 56g weight adds minimal strain to your setup
Helps achieve a dynamic load rating of up to 129kN, so it can handle heavy-duty use
Helps achieve a dynamic load rating of up to 129kN, so it can handle heavy-duty use
Applications
Packaging equipment
Sorting lines
Conveyor systems
Sorting lines
Conveyor systems
Why do I need a locating ring?
SKF's plummer block and pillow block housings are designed to hold bearings in both the locating and non-locating position. While non-locating bearings can be allowed to move axially along the shaft while it's spinning, locating bearings need to stay in one place. Using a locating ring stops the bearing from slipping while the shaft is in motion.
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 92mm |
Centre Height | 70mm |
Mount Hole Size | 12 mm |
Length | 255mm |
For Use With | Bearing |
- RS-stocknr.:
- 213-1343
- Fabrikantnummer:
- FRB 9.5/100
- Fabrikant:
- SKF