Pepperl + Fuchs PLC Power Supply VAR Series AS-I, 26.5 → 31.6 V, 60 mA 22.5 x 99 x 92 mm

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

AS-I Repeater

22.5 mm width housing
Line lengthening by 100 m (max. 2 repeater in series)
Galvanic isolation between AS-Interface circuits 1 and 2
No need to parameter
Need no specific address on the AS-Interface bus
Housing with removable terminals

//media.rs-online.com/t_line/L316042-01.gif

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.
A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time. The cable can be used in a network up to 100m (300m if repeaters are used).
By providing power and data down the same cable, the amount of time normally used to connect sensors and actuators is dramatically reduced, thereby providing savings in cable requirements and man-hours.
The choice of AS-I connection modules enables the user to connect standard sensors/actuators to the BUS with all the address benefits of using dedicated sensors/actuators. It also serves to increase the number of I/O nodes that are available to the user by the use of addressable splitter boxes. The connection modules are available in a variety of packages and can accommodate up to 4 inputs and 4 outputs. This enables up to 124 inputs and 124 outputs to be connected to a single AS-I network.
Another feature of AS-I system is the method by which the sensors or modules communicate with the host. The design of the communications protocol ensures high data accuracy and error detection capabilities, making the ASI system ideal for automation in noisy and industrial environments.

Benefits of AS-I

Replaces hard wiring
High data speed
Low cost installation
Intelligent diagnostics
Easy to learn and install
Highly flexible
Can connect to other fieldbus systems
User-friendly
Off-site pre-assembly and test
Easy maintenance
Faster on-site commissioning
Host or stand alone use
Able to use standard sensors and actuators (using modules)

Specificaties
Kenmerk Waarde
Manufacturer Series VAR
For Use With AS-I
Line Voltage 26.5 → 31.6 V
Output Current 60 mA
Length 22.5mm
Width 99mm
Depth 92mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Dimensions 22.5 x 99 x 92 mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
389,00
(excl. BTW)
470,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
389,00 €
Related Products
Ethernet to Serial adapter provides access to two ...
Description:
Ethernet to Serial adapter provides access to two RS232 serial ports. Data transfer rates up to 1,000,000 baud, coupled with 1Mbit/s line drivers, deliver uncompromising performance. The adapter is powerful in operation and simple to use with a user friendly ...
Ethernet to Serial server provides access to 1 ...
Description:
Ethernet to Serial server provides access to 1 RS232 serial port. Data transfer rates up to 1,000,000 baud, coupled with 1Mbit/s line drivers, deliver uncompromising performance. Thes server has a user friendly interface, making it simple to use and powerful ...
SCALANCE XB008 Unmanaged Industrial Ethernet Switch for 10/100 ...
Description:
SCALANCE XB008 Unmanaged Industrial Ethernet Switch for 10/100 Mbit/s for setting up small star and line topologies, LED diagnostics, 24 V AC/DC power supply, with 8x 10/100 Mbit/s twisted pair ports with RJ45 sockets.
Barth PG-65 Parameter Programmer has been designed for ...
Description:
Barth PG-65 Parameter Programmer has been designed for wireless communication with the Mini-PLC STG-8xx series using IrDA or CAN interface to upload and download user-defined parameters.The STG-8xx CAN and IrDA interfaces are Open Source programmable using the powerful KEIL μVision ...