Phoenix Contact FL COMSERVER UNI 232/422/485 Series Interface Converter, 19.2 → 28.8 V ac/dc
- RS-stocknr.:
- 696-2119
- Fabrikantnummer:
- 2313452
- Fabrikant:
- Phoenix Contact
17 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs Per stuk
€ 612,11
(excl. BTW)
€ 740,65
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 612,11 |
- RS-stocknr.:
- 696-2119
- Fabrikantnummer:
- 2313452
- Fabrikant:
- Phoenix Contact
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
Phoenix Contact FL COMSERVER UNI series of PLC I/O Module
Introducing the second generation FL COMSERVER from Phoenix Contact. Converting serials and interfacing to ethernet, supporting TCP, UDP, Modbus gateway & PPP applications.
Features and Benefits
• All connections can be plugged in using a COMBICON screw terminal pack.
• Configuration available via web-based software management tool SNMP (emergency exit with Telnet and serial).
• Software for virtual COM ports supplied as standard.
• Modbus gateway between Modbus RTU / ASCII and Modbus/TCP.
• Protected to IP 20.
• Ethernet interface RS-485.
• Automatic data flow control/protocols.
• Serial transmission speeds up to 1000 kbps.
• Configuration available via web-based software management tool SNMP (emergency exit with Telnet and serial).
• Software for virtual COM ports supplied as standard.
• Modbus gateway between Modbus RTU / ASCII and Modbus/TCP.
• Protected to IP 20.
• Ethernet interface RS-485.
• Automatic data flow control/protocols.
• Serial transmission speeds up to 1000 kbps.
Typical Applications
• Manufacturing.
• Industrial controls.
• Military, scientific or commercial fields.
• Industrial controls.
• Military, scientific or commercial fields.
Phoenix Contact Serial Interface Converter, 28V DC, 240V AC - FL COMSERVER UNI 232/422/485 - 2313452
Ensure smooth data transmission between devices by connecting them with this interface converter from Phoenix Contact. It alters the serial interface of devices into a single line of digital data, allowing two different systems to communicate.
The converter is a second-generation device from Phoenix Contact's reliable FL COMSERVER UNI series. It can support up to four different kinds of interfaces, including an Ethernet port, so it's a versatile choice. You can connect each device using a COMBICON screw terminal pack, which locks it in for safe and fast data transmissions of up to 1000kbps (kilobits per second).
An LED (light-emitting diode) clearly lets you know the status of the device. Choose this converter in a PLC (programmable logic controller) for effective data transfer – you can use an SNMP (simple network management protocol) software tool to manage it remotely at your convenience.
The converter is a second-generation device from Phoenix Contact's reliable FL COMSERVER UNI series. It can support up to four different kinds of interfaces, including an Ethernet port, so it's a versatile choice. You can connect each device using a COMBICON screw terminal pack, which locks it in for safe and fast data transmissions of up to 1000kbps (kilobits per second).
An LED (light-emitting diode) clearly lets you know the status of the device. Choose this converter in a PLC (programmable logic controller) for effective data transfer – you can use an SNMP (simple network management protocol) software tool to manage it remotely at your convenience.
Features & Benefits
• ATEX (Appareils destinés à être utilisés en atmosphères explosives) certified for safe use in hazardous environments
• Polyamide (PA) material is resistant to abrasion
• EMC (electromagnetic compatibility) directive prevents interference with other electronics
• IP (ingress protection) rating of IP20 for safe contact with objects over 12mm in size
• Polyamide (PA) material is resistant to abrasion
• EMC (electromagnetic compatibility) directive prevents interference with other electronics
• IP (ingress protection) rating of IP20 for safe contact with objects over 12mm in size
Specificaties
Kenmerk | Waarde |
|---|---|
| Accessory Type | Interface Converter |
| Series | FL COMSERVER UNI 232/422/485 |
| Supply Voltage | 19.2 → 28.8 V ac/dc |
| Mounting Type | DIN Rail |
| Maximum Operating Temperature | +60°C |
| Dimensions | 86 x 12.3 x 96 mm |