Schneider Electric Modicon M238, Twido Series PLC I/O Module 8 Outputs 24 V dc, 90 x 24 x 70 mm

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Twido Digital Input/Output Modules

All digital input and output modules connect to the controller - and to each other - by means of a simple latching mechanism. A clamp on the back of each module allows connection of the controller and I/O rack to a DIN rail. Dimensions for all Input/Output units: H90 x W24 x D70. Supply voltage for all units: 24Vdc.

Versions with screw terminals, HE connectors and spring terminals available:
Versions with screw terminals: 674-1940, 674-1943, 674-1956, 674-1971 and 674-1962
Versions with HE connectors: 444-4498, 674-1946, 674-1959, 674-1952 and 674-1968
Version with spring terminals: 674-1965

Schneider Electric Twido Digital & Analogue I/O Modules & HMI

Small form factor Twido digital and analogue Input, Output and Input/Output modules with a choice of the following:

Digital input modules: 8-point, 16-point and 32-point, equipped with either terminal blocks or connector wiring
Digital output modules: 8-point and 16-point relay output modules; 8-point, 16-point and 32-point transistor sink output modules; and 8-point, 16-point, and 32-point transistor source output modules, equipped with either terminal blocks or connector wiring
Mixed digital Input and Output modules, consisting of one 4-point input/4-point output module with terminal block wiring, and one 16-point input/8-point output module with wire-clamp terminal block wiring

Specificaties
Kenmerk Waarde
Manufacturer Series Modicon M238, Twido Series
Number of Outputs 8
Output Type Digital
For Use With Modicon M238, Twido Series
Voltage Category 24 V dc
Module Type Output Module
Length 90mm
Width 24mm
Depth 70mm
Dimensions 90 x 24 x 70 mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 30/03/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
137,43
(excl. BTW)
166,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
137,43 €
Related Products
These modules convert digital PLC values into 2 ...
Description:
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
NX series IO-Link master unit form Omron. The ...
Description:
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
The Siemens digital expansion module with 8 output ...
Description:
The Siemens digital expansion module with 8 output channels is a highly efficient device used with SIMATIC ET 200S PLCs. It has various advanced features like diagnostics indication LEDs, short circuit protection, reverse voltage protection, and potential isolation between the ...
Range of couplers for analogue and digital signals.Enables ...
Description:
Range of couplers for analogue and digital signals.Enables I/O connection to various protocols Modbus, Profi∼NET, Profibus and FireWireConfiguration simplified with switches or rotary encoders.A termination module should be connected to the end of the loop, to guarantee correct transmission of ...