Siemens SIMATIC ET 200S PLC I/O Module 4 Inputs, 24 V dc, 81 x 15 x 52 mm

  • RS-stocknr. 662-3167
  • Fabrikantnummer 6ES7131-4BD01-0AA0
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

ET 200S — digital electronic module

Digital input and outputs for the ET 200S
Connect to terminal modules TM-E with automatic encryption
High-spec version for increased system availability, additional functionality and extensive diagnostics
Module exchange during operation subject to voltage (hot swapping)

Specificaties
Kenmerk Waarde
Manufacturer Series SIMATIC ET 200S
Number of Inputs 4
Input Type Digital
For Use With SIMATIC ET 200S Series
Number of I/O 4
Voltage Category 24 V dc
Length 81mm
Width 15mm
Depth 52mm
Dimensions 81 x 15 x 52 mm
Maximum Operating Temperature +55°C
Minimum Operating Temperature 0°C
78 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
27,40
(excl. BTW)
33,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
27,40 €
Related Products
NX series IO-Link master unit form Omron. The ...
Description:
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. Communication modules for Millenium 3 logic modules.Enables Modbus (slave), Ethernet (slave), Modem interface, RTC Modem and GSM Modem type communications.
Analogue I/O modules with 4 channels, 12 bit ...
Description:
Analogue I/O modules with 4 channels, 12 bit resolution and direct addressing. Suitable for connection to FX3 PLC's only. 4AD module with 4 channels suitable for 0-10V and 4-20mA analogue inputs 4DA module with 4 channels suitable for 0-10V and ...
The device has 2 channels which can be ...
Description:
The device has 2 channels which can be parameterised as inputs or outputs by selecting the application ETS2 programUsing the colour-coded connecting cables, it is possible to connect conventional push buttons, potentialfree contacts or LEDsThe scanning voltage for the contacts ...