Thermo couple module,6ES73317KF020AB0

  • RS-stocknr. 453-2545
  • Fabrikantnummer 6ES7331-7KF02-0AB0
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Siemens Thermocouple Expansion Module

The Siemens thermocouple expansion module is designed to use with SIMATIC S7-300 PLCs. It is optically isolated. It supports various input types like voltage sensors, current sensors, thermocouples and resistor thermometers. It has advanced features like alarms and diagnostics that make it an ideal choice for analogue heat-sensing applications.

Features and Benefits

Out of 8 analogues inputs, 4 are thermocouple inputs
Supports standard input like E, N, J, K, L, Pt 100 and Ni 100
Measurement of voltage, current and temperature (RTD)
Resolution 9/12/14 bits
Galvanic isolation between the channels and the backplane bus
Supply voltage rating of 24VDC

Applications

Industrial automation
Robotics
Automobiles industry

Specificaties
Kenmerk Waarde
For Use With S7-300 Series
Input Type Analogue
Number of Inputs 8
Voltage Category 24 V dc
Length 125mm
Width 40mm
Depth 120mm
Dimensions 125 x 40 x 120 mm
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
724,00
(excl. BTW)
876,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
724,00 €
Related Products
The RevPI Gate Modbus RTU is used to ...
Description:
The RevPI Gate Modbus RTU is used to easily integrate the RevPi core into an existing Modbus RTU network. The Modbus RTU Gateway is connected to the RevPi Core base module via the top system connector. Up to two different ...
Communications processor CP 443-1 Advanced 1x 10/100/1000 Mbit/s, ...
Description:
Communications processor CP 443-1 Advanced 1x 10/100/1000 Mbit/s, 4x 10/100 Mbit/s (IE switch) RJ45 ports, ISO, TCP, UDP, PROFINET IO controller, S7 communication, Open Communication (SEND/RECEIVE), S7 routing, IP configuration via DHCP/block, IP Access Control List, Time synchronization, extended web ...
The Siemens networking interface CPU is integrated with ...
Description:
The Siemens networking interface CPU is integrated with PROFIBUS DP interface as a DP master. It requires SIMATIC MMC to use without battery. It is IP20 rated. Decentralized peripheral system at small wiring expenditure and also for time-critical tasks like ...
SIMATIC Net communication processor and modules for connecting ...
Description:
SIMATIC Net communication processor and modules for connecting the SIMATIC S7-300 and ET200M to AS-Interface Configurable with STEP 7 ACCOR. AS-Interface SPEC. V3.0. The following modules can be operated using automation systems from both the SIMATIC and SIMOTION ranges:CP 343-2 ...