Opto 22 IB STME 24 AI 4/EF Series PLC I/O Module for Use with G4 I/O Modules, 5 V dc, 15 V dc, 24 V dc
- RS-stocknr.:
- 888-7971
- Fabrikantnummer:
- G4PB16H
- Fabrikant:
- Opto 22
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 888-7971
- Fabrikantnummer:
- G4PB16H
- Fabrikant:
- Opto 22
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- US
Productomschrijving
Opto 22 PLC I/O Module
The Opto 22 G4 series panel mount rack holds 16 digital I/O modules, both AC and DC. This rack is designed for use with Optomux B1 or E1, Pamux B5 and mistic B100 brain boards which are attached through a standard 50-pin cable to a header connector. These modules are secured to the mounting rack via a threaded captive hold-down screw. It is compatible with the Digital I/O Carrier Board for Raspberry Pi® and PBSA/B/C power supplies. This module applies to communication systems.
Features and Benefits
Built in fuse tester
Spare fuse included
Supply voltage ranges between 5VDC and 24VDC
Screw-type barrier strip accommodates up to 10AWG wire
2-position screw terminal
Compatible with the Digital I/O carrier board for Raspberry Pi
Operating temperature ranges between 0°C and 70°C
Spare fuse included
Supply voltage ranges between 5VDC and 24VDC
Screw-type barrier strip accommodates up to 10AWG wire
2-position screw terminal
Compatible with the Digital I/O carrier board for Raspberry Pi
Operating temperature ranges between 0°C and 70°C
Certifications
UL approved
CSA certified
CE
DFARS
CSA certified
CE
DFARS
Specificaties
Kenmerk | Waarde |
---|---|
Accessory Type | PLC I/O Module |
Series | IB STME 24 AI 4/EF |
For Use With | G4 I/O Modules |
Supply Voltage | 5 V dc, 15 V dc, 24 V dc |
Application | Communication |
Mounting Type | Panel Mount |
Maximum Operating Temperature | +70°C |
Dimensions | 274.8 x 82.6 x 58.9 mm |