P.M.A KS50 PID Temperature Controller, 96 x 48 (1/8 DIN)mm, 2 Output Relay, 90 250 V ac Supply Voltage ON/OFF

  • RS-stocknr. 736-4871
  • Fabrikantnummer KS50-100-0000D-000
  • Fabrikant P.M.A
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: DE
Productomschrijving

PMA KS 50-1 Temperature Controller

The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.

The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.

The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.

• Universal continuous/switching version, i.e. reduced stocks
• 100ms cycle time, i.e. also suitable for fast control loops
• 20ms as shortest pulse for very fast / strong actuators
• Freely configurable analog output, e.g. as process value output
• Customer-specific linearisation for all sensors
• Settings can be blocked via password and internal switch for high security
• Extended temperature range up to 60 °C allows mounting close to the process
• Easy 2-point or offset measurement correction
• Emergency operation after sensor break by means of the "output hold" function
• Logical combination of digital outputs, e.g. for general alarm
• Programmer with 10 segments and "end" signal
• RS 422/485 Modbus RTU interface
• Built-in transmitter power supply
• Splash-water proof front (IP65)

Supplied with

German Manual

PMA Temperature Controllers

Specificaties
Kenmerk Waarde
Output Type Relay
Supply Voltage 90 250 V ac
Size 96 x 48 (1/8 DIN)mm
Number of Outputs 2
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Temperature Range -200 +200 (PT1000) °C, -200 +850 (PT100) °C, -100 +1200 (Type J Thermocouple) °C, -100 +1300 (Type N Thermocouple) °C, -100 +1350 (Type K Thermocouple) °C, -100 +900 (Type L Thermocouple) °C, -50 +150 (KTY 11-6) °C, 0 +1760 (Type R Thermocouple) °C, 0 +1760 (Type S Thermocouple) °C
Control Type ON/OFF
Display Type LED, Multi Line
IP Rating IP00, IP20, IP65
Range PMA KS50-1
Panel Depth 118mm
Series KS50
Sorry, we konden onze voorraadniveaus nu niet controleren. Probeer de pagina te vernieuwen.
Prijs Each
375,02
(excl. BTW)
453,77
(incl. BTW)
Aantal stuks
Per stuk
1 +
375,02 €
Related Products
The West Instruments P6100 series temperature controller has ...
Description:
The West Instruments P6100 series temperature controller has a supply voltage rating ranging from 100VAC to 240VAC. This controller has a width of 48mm and a height of 48mm(1/16 DIN) device. It has a thermocouple input and relay output. It ...
The Eurotherm 2108i series PID temperature controller provides ...
Description:
The Eurotherm 2108i series PID temperature controller provides accurate measurement and display of temperature along with other process variables in a standard, 1/8 DIN panel format. It is enabled with 2 alarm relay outputs for operator alert and process protection. ...
48 x 96 controllers, dual 4-digit display with ...
Description:
48 x 96 controllers, dual 4-digit display with configurable universal input on front panel.Self-adjusting, self-adapting, soft start, auto / manual function, internal / external preset.The main measurement input is universal, allowing various types of sensors to be connected.The units are ...
The 8010+ is a digital panel process indicator ...
Description:
The 8010+ is a digital panel process indicator which provides a high contrast, high visibility display. The indicator is designed for optimal ease of use in a wide variety of temperature and related process applications. The 8010+ provides a jumperless ...