Microchip Technology KSZ8081RNDCA-TR, IEEE 802.3 Ethernet Transceiver, 24-Pin QFN

  • RS-stocknr. 177-2820
  • Fabrikantnummer KSZ8081RNDCA-TR
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.

Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)

Specificaties
Kenmerk Waarde
Standard Supported IEEE 802.3
Number of Channels per Chip 1
Typical Data Rate 100Mbit/s
Integrated CDR Yes
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Dimensions 4 x 4 x 0.83mm
Height 0.83mm
Length 4mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature 0 °C
Width 4mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 1000)
0,769
(excl. BTW)
0,93
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
1000 +
0,769 €
769,00 €
*prijsindicatie
Related Products
The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port ...
Description:
The KSZ8795 is a highly-integrated, Layer 2-managed, 5-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring four 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. Integrated 5-port 10/100 Layer-2 switch with ...
The KSZ8864RMN is a highly-integrated, Layer 2 managed ...
Description:
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost. ...
The KSZ8794CNX is a highly integrated, Layer 2 ...
Description:
The KSZ8794CNX is a highly integrated, Layer 2 managed, four-port switch with numerous features designed to reduce system cost. It is intended for cost-sensitive applications requiring three 10/100Mbps copper ports and one 10/100/1000Mbps Gigabit uplink port. The KSZ8794CNX incorporates a ...
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs ...
Description:
The KSZ8863MLL/FLL/RLL are highly integrated 3-port switch ICs in a small footprint. They are designed to enable a new generation of low port count, cost-sensitive and power efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS ...