Kyoritsu KEW8035 Phase Rotation Tester CAT III 1000V, CAT IV 600V CAT III 1000 V, CAT IV 600 V 66Hz 1000V ac, Model 8035

  • RS-stocknr. 724-0696
  • Fabrikantnummer KEW8035
  • Fabrikant Kyoritsu
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: JP
Productomschrijving

KEW8035 Non-contact Phase Rotation Tester

KEW8035 the first non-contact phase rotation tester. Safely test phase rotation without the need to expose live contacts. The unit requires no metal contact ideal for safer and faster testing. Super bright mode gives clear indication even in bright sunlight.

KEW8035 uses a combination of LED and audible tones to indicate phase direction. Green LEDs are used for clockwise direction with an intermittent tone. Red LEDs are used for anti clockwise direction with a continuous tone. The tester is suitable for a wide range of 3 phase installations from 70 V to 1000 V ac. It comes with a magnetised back for attachment to a metallic surface for hands-free testing.

Permits safe testing, without the need of direct contact between probes and live wires
Wide measuring range for 3 phase installations from 70 V → 1000 V ac
The insulated crocodile clips can clip insulated cables from Ø 2.4 mm → 30 mm
Double insulated cables, length approx. 70 cm
KEW8035 can be fixed to a metal panel via the magnet on the back
Phase rotation is indicated by the rotary illumination of LEDs and logical audible tones.
Complies with IEC61010-1 CAT.IV 600 V and CAT.III 1000 V

Supplied with

9096 (Carrying case), Alkaline battery (LR6) ´ 4 and Instruction manual

Specificaties
Kenmerk Waarde
Connection Type Crocodile Clip
Overvoltage Category CAT III 1000V, CAT IV 600V
Safety Category CAT III 1000 V, CAT IV 600 V
Calibrated RSCAL
Non-Contact Non Contact
Battery Life 100 h
Battery Type AA
Power Source Battery
Dimensions 61 x 36 x 112mm
Weight 380g
Height 112mm
Length 61mm
Maximum Frequency 66Hz
Maximum Operating Temperature +50°C
Model Number p 8035
Minimum Voltage 70V
Minimum Operating Temperature -10°C
Width 36mm
Safety Category Voltage 600 V, 1000 V
Minimum Frequency 45 Hz
Safety Category Level CAT III, CAT IV
Maximum Voltage 1000V ac
8 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
457,78
(excl. BTW)
553,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
457,78 €
Related Products
16A BS4343 4 pin (3P + E) socket ...
Description:
16A BS4343 4 pin (3P + E) socket tester for testing 400V systems. Tough rubber holster for heavy duty usePhases clearly identified at L1, L2, L3Instant phase sequence is given by 3 green LEDs rotating clockwise with a continuous tone ...
Optimised for 230V single and 3 phase suppliesAudible ...
Description:
Optimised for 230V single and 3 phase suppliesAudible and visual indication from 200V to 1000V ACExtended probe for easy accessClear tip for high visibility indicationLED torch for use in low lightPower on LED pulse and low battery indicator.
Phase sequence display with LCDDisplay of a missing ...
Description:
Phase sequence display with LCDDisplay of a missing or incorrectly connected outer conductorNon-contact motor rotation indicator when the motor is runningDe-energised identification of motor connections (U, V, W) via a manual driveProduct informationFast detection of phase sequence in three-phase supplyVoltage ...
The MTR105 is a dedicated Static Motor Tester ...
Description:
The MTR105 is a dedicated Static Motor Tester with Megger’s suite of insulation resistance tests (IR), plus all the traditional features of Megger’s testers.The MTR105 takes the test abilities of Megger’s proven IR test instruments adding DLRO four wire Kelvin ...