Molex C-GRID Series Keying Plug

  • RS-stocknr. 170-7068
  • Fabrikantnummer 15-04-0292
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Socket Housings, 90142 Series

Mates with 90122; 90130 and 90131 Series headers, use with 90119 Series terminals

Standards

DIN 41651; HE13/14

2.54mm Molex C-Grid III Range

Specificaties
Kenmerk Waarde
Accessory Type Polarizing Key
For Use With 2.54mm Pitch C-Grid and SL Connectors
Series Number 4161
Series MX50
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 5000)
0,137
(excl. BTW)
0,166
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
5000 +
0,137 €
685,00 €
*prijsindicatie
Related Products
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector ...
Description:
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-156 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the ...
Flat Flexible Cable Accessory Type=Keying Plug, Primary Product ...
Description:
Flat Flexible Cable Accessory Type=Keying Plug, Primary Product Color=Black, Product Length=5.58 mm, CSA File Number=LR 7189, Packaging Method=Bag/Box, Comment=Receptacle Connector.
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector ...
Description:
MTA-156 (Mass Termination Assembly) 3.96 mm pitch connector system for labour and cost saving mass termination of wires in wire-to-board and wire-to-wire applications. These MTA-156 connectors are based on IDC (insulation displacement contact) technology allowing one-step assembly and eliminating the ...
A range of low profile 1.27 mm Pitch ...
Description:
A range of low profile 1.27 mm Pitch Picoflex Headers for use with 90327 Series housings, see stock number 324-8047 typical. Fitted with friction lock, polarisation and stamped contacts with in-line flat tabsRigid solder tails require 0.8mm hole.