Murrelektronik Limited Optocoupler, Max. Forward 5 (Off) V dc, 53 (On) V dc, Max. Input 6 mA, 78mm Length,

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

MIRO TR DIN Rail Optocoupler

MIRO TR Optocouplers are used to combine different signal levels or to isolate one signal from another. They provide an optoelectronic signal transfer between input and output, and therefore, never wear out.

• DIN Rail mounting
• Compact, 6.2 mm width
• Made to last
• No mechanical wear
• Silent operation
• No contact bounce times
• Short switching times
• Models with switching frequencies up to 500 kHz
• Shock and vibration resistant
• Low input power
• LED (yellow) input display
• Spring clamp or screw terminals

Specificaties
Kenmerk Waarde
Maximum Forward Voltage 5 (Off) V dc, 53 (On) V dc
Maximum Input Current 6 mA
Isolation Voltage 3.75kV
Rise Time 35µs
Pin Count 4
Mounting Style DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Length 78mm
Width 6.2mm
Depth 65mm
Operating Temperature Range -20 → +60 °C
Output Type Phototransistor
Input Type LED
Dimensions 78 x 6.2 x 65 mm
67 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
106 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,54
(excl. BTW)
29,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
24,54 €
Related Products
PLC Interface single- and double-pole relays, and opto-couplers, ...
Description:
PLC Interface single- and double-pole relays, and opto-couplers, having the same profile. This allows the modules to be installed in any configuration with a common bridging system and using the same accessories. The V8 adapter connects 8 relays or opto-couplers ...
In order to fit voltage/current together with galvanic ...
Description:
In order to fit voltage/current together with galvanic insulation, interface is necessary through devices providing these functions plus transmission of input/output logic signals.,The R600 range of relays and optocouplers makes it possible. These devices provide many voltage and current adjustments ...
These DIN rail mount opto-couplers from Phoenix Contact ...
Description:
These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment ...
The PDV13 series from Infineon is a single ...
Description:
The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic ...