Phoenix Contact, DEK-OV- 24DC/24DC/3/AKT Series , 24 V dc Optocoupler Terminal Block, Screw Down Termination

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Phoenix Contact Opto-Couplers with Solid State Relay Output

These DIN rail mount opto-couplers from Phoenix Contact provide an ideal means of interfacing on/off signals to, or from, equipment, whilst providing electrical isolation between their own inputs and outputs. In other words, these may be used to protect equipment by electrically isolating its inputs, outputs, or both. The dc/ac and ac/dc versions also provide a means of interfacing (whilst isolating) ac and dc control voltages.

Features and Benefits

• Dc in/Dc out, Dc in/Ac out and Ac in/Dc out versions available
• Versions with switching speeds up to 100kHz available
• 2.5kVac input to output isolation
• LED status indication
• Module width 6.2mm
• Operating temperature range: -20 to +60°C

Standards

IEC 60 664, IEC 60 664A, DIN VDE 0110

Specificaties
Kenmerk Waarde
Series DEK-OV- 24DC/24DC/3/AKT
Wire Size 24 → 12 AWG
Colour Green
Termination Method Screw Down
Voltage Rating 24 V dc
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
53 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
46,83
(excl. BTW)
56,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
46,83 €
5 - 9
44,49 €
10 +
42,15 €
Related Products
Screw-connection terminal blocks ensure an electrical connection between ...
Description:
Screw-connection terminal blocks ensure an electrical connection between 2 solid-centre or flexible conductors. Green and yellow for the earth conductors.One junction (1 input / 1 output) - metal stand.
A 2 tier terminal, enabling higher density wiring ...
Description:
A 2 tier terminal, enabling higher density wiring on the rail. The WDK2.5 is a standard feed through while the WDK2.5V has a commoning bar connecting upper and lower tiers. All materials comply with RoHS requirements and have been tested ...
A range of spring feed through DIN Rail ...
Description:
A range of spring feed through DIN Rail terminals with a proven tension spring connection system for the smallest cross sections ranging from 0.2mm² up to 16mm². This system provides safe and quick connections for solid and stranded wires, with ...
Feed-through DIN rail terminal block with screw connection ...
Description:
Feed-through DIN rail terminal block with screw connection for mounting on TS 35 DIN railNominal cross section 16 mm²Max. current 101A / 25 mm²Connection capacity: 2 wires, equal size 2.5 - 10mm²Width 12 mmFor the compatible WT 10 PE earth ...